Dual XDMA6330 specs

XDMA6330 OPERATION

General Operation

Escape

Audio

Bass

Treble

Balance

Fader

Subwoofer

Source Volume Level

Press ESC to exit any menu adjustment mode.

Press AUDIO/MENU momentarily to select between Bass, Treble, Balance, Fader, EQ, Subwoofer* and Source Volume Level.

BASS TREBLE BALANCE FADER EQ SUBWOOFER* SOURCE LEVEL

Press AUDIO/MENU until BASS appears, then rotate the volume knob left/right to adjust (-6 minimum / +6 maximum).

Press AUDIO/MENU until TREBLE appears, then rotate the volume knob left/right to adjust (-6 minimum / +6 maximum).

Note: Bass and Treble settings are saved as the USER EQ setting.

Note: Bass and Treble settings are retained for each mode individually.

Press AUDIO/MENU until BAL appears, then rotate the volume knob left/right to adjust (BAL L12 to BAL R12). BAL 00 represents equal balance.

Press AUDIO/MENU until FADER appears, then rotate the volume knob left/right to adjust (FADER F12 to FADER R12). FADER 00 represents equal fader.

Press AUDIO/MENU until EQ appears. Rotate the volume knob left/right to select between FLAT (default), POP, JAZZ, CLASSIC, BEAT, ROCK and USER equalization curves. Press SELECT to confirm. Any manual adjustment to the Bass or Treble settings are automatically saved as USER.

Press AUDIO/MENU until SUB-Wappears, then press SELECT to confirm. Rotate the volume knob left/right to adjust (0-12). Adjusting levels to 0 turns the subwoofer off.

The source volume level control allows a gain adjustment for each audio source: AM, FM, CD, AUX, USB, iPod and Bluetooth. Set the source volume level for each mode, depending on the relative volume of each audio source.

To set the source volume level, press AUDIO/MENU until SRC LEVEL appears. After one second, the current mode will appear on the display. Turn the volume knob to adjust the audio level of the current source (-6 minimum/+6 maximum).

Note: Only the current mode will be available for adjustment. To adjust another mode of operation, press MODE until the desired mode is selected, then set the source volume level for that mode.