MXD254B INSTALLATION
Wiring Diagram
Rear Preamp Output
Connect to amplifier RCA input
BLUE
BLACK
RED
5AMP AGC Fuse
RCA Cable
(sold separately)
Antenna Connector
Remote |
|
| AMP |
Connect to amplifier or power |
|
| |
antenna. Insulate wire if not used. |
|
|
|
|
|
|
|
Ground
Connect to chassis ground.
Accessory
Connect to ignition
circuit or switched 12 volt source.
YELLOW
Right Front
Gray/Black
Gray (+)
Memory
Connect to battery
circuit or constant 12 volt source.
Right Rear
Violet/Black
Violet (+)
FUSE
When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The MXD254B uses one 5 amp AGC fuse located
Left Front | Left Rear |
White/Black | Green/Black |
White (+) | Green (+) |
*Caution - Do not attach any speaker leads to ground as severe damage will occur.
3