XDVD9101 OPERATION
Display
Secondary LCD
Open Monitor
3.5mm A/V Input
USB Input
Reset
Channel/Chapter/Track Up Fast Forward
Play/Pause
Channel/Chapter/Track Down Fast Reverse
Disc-in Indicator
Infrared Sensor
Band
Mode
Mute
Eject
Control Functions - Monitor Closed
When the monitor is closed, press DISP to toggle display between information available for the current mode such as clock, frequency, track or chapter information.
Additional LCD for system information while monitor is closed.
Press OPEN to open or close the monitor. Be careful not to not touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur.
Connect external devices to this 3.5mm auxiliary audio/video input.
Insert USB flash drive to play MP3, WMA or JPEG files.
To resolve abnormal operation or if the unit is inoperable, press the
RESET button located to the left of the USB input on the front panel. The unit will reset the main processor to the default settings.
Note: Use the tip of a pen to access the reset button. To restore the factory default settings, refer to page 19.
Press to select the next channel/chapter/track for playback. Press and hold to manual tune up or fast forward.
In disc mode, press once for PAUSE, and "PAUSE" will appear in the display. Press again to resume PLAY.
Press to select the previous channel/chapter/track for playback. Press and hold to manual tune down or fast reverse.
Red = Disc inserted, Blue = No disc.
Point the remote control towards the infrared sensor to control various functions of the unit.
Press BAND to increment from FM1, FM2, ] AM. While in disc mode, press BAND momentarily to stop disc play.
Press MODE to select between Tuner, Disc (which includes DVD and CD playback), iPod, USB, Auxiliary 1 and Auxiliary 2 inputs. Each time the MODE button is pressed the next mode is chosen. Modes of operation are indicated on the OSD or the secondary LCD. iPod and USB flash drive (optional) must be connected/inserted to appear in the MODE selection string.
Press MUTE to silence audio output. "MUTE" will flash in the secondary display. Press MUTE again to restore audio at previous volume level. Press and hold MUTE to toggle the Loudness function On or Off.
Press 
once to eject disc.
10