XDVD9101 OPERATION
General Operation
Power On/Off
Mute
Loudness
Mode
Optional Mode Selection
Volume
Audio Setup
(from OSD)
Audio Setup (from remote)
Momentarily press PWR or any other button (except EJECT) to turn the unit on. Hold for 3 seconds to turn the unit off.
Press MUTE to silence the audio; 
will appear in the OSD (On Screen Display). Press MUTE again to cancel.
Press LOUD on the OSD to turn the Loudness on/off. Pressing and holding the MUTE button on the front panel or remote will also turn the Loudness on/off.
Press MODE to select between Tuner, Disc (which includes DVD and CD playback), iPod, USB, Auxiliary 1 and Auxiliary 2 inputs. Modes of operation are indicated on the OSD On Screen Display). iPod and USB flash drive (optional) must be connected/inserted to appear in the MODE selection string.
Press MENU at the top left corner of the screen to display the OSD main menu. Press Tuner, Disc, iPod, USB, AV/1, AV/2 or Camera in the MAIN menu page to select the desired source.
Turn the rotary or use the volume or to adjust the volume level lower or higher
) when the monitor is open. Turning the rotary while the volume is muted will cancel the mute function.
From Tuner, Disc (CD only), iPod or USB mode, touch EQ on the OSD or press the rotary momentarily to enter the Audio Setup menu. Adjust audio parameters by pressing the desired level you wish to change. Operation will return back to previous mode after 15 seconds of inactivity or by pressing the RETURN arrow in the top right corner.
Press the SEL button. Press the p or q buttons on the remote to select an item to be adjusted. Press or to decrease
Note: The Bass and Treble levels are only adjustable when EQ is set to "User” mode. The Loud function compensates for deficiencies in sound ranges at low levels. When the Loud function is on, LOUD:On is displayed in the OSD.
15