Classe Audio CAP-2100 owner manual

Page 2

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO

NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED PERSONNEL.

NOTICE

All of us at Classé take extreme care to ensure that your purchase will remain a prized investment. We are proud to inform you that all Classé components have been officially approved for the European Community (CE) mark.

This means that your Classé product was subjected to the most rigorous manufacturing and safety tests in the world. The CE mark certifies that your purchase meets or exceeds all European Community requirements for unit-to-unit consistency and consumer safety.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and the receiver;

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

This product incorporates copyright protection technology that is protected by U.S. patents ad other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

The information contained in the manual is subject to change without notice. The most current version of this manual will be posted on our web site at http://www.classeaudio.com.

Marking by the “CE” symbol (shown left) indicates compliance of this device with the EMC

(Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the European Community.

Classé products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these directives.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

2

Image 2
Contents CAP-2100 Integrated Amplifier Page Important Safety Instructions Do not use this apparatus near waterContents Version info Sensors Word about installation Welcome to the Classé familyUnpacking and Placement Placement Ventilation Custom installationsOperating voltage Warm up/break-in period Special Design Features Extraordinary longevity Off Standby button & LED indicatorFront Panel Mute button Menu buttonLCD touchscreen IR windowVolume Knob Single-ended RCA main outputs Rear PanelSpeaker Outputs Tape Input Optional phono preampTape output Single-ended RCA inputsPin 3 Signal inverting IR Input and OutputDC Trigger Input and Output Classé CAN-Bus Control PortsRS-232 Control Port Ground terminalAC Mains Power Switch AC Mains FuseNavigation Keys Remote ControlBasic Functions Input Selection System ControlsInput selection Tape loop Menu SystemOperational menu Main menu system System setup Rotary Page Input Page Phono gain Triggers Max volume CAP-2400 Teach IR Display setup Brightness Timeout Language Colors Volume Main balance Remote Fkeys CAN-Bus StatusVersion info Sensors Category 5 Network Cables Features Hardware setupClassé Delta Series Products CAN-Bus Terminator SSP-300 & 600 CAN-Bus Interface BoxUsing CAN-Bus Configuration Operate AC status Status Name Global brightness Global standby PlayLinkAmp info Event log There is no sound and the Standby LED is not lit TroubleshootingEverything appears to be on, but there is no sound If your integrated amplifier was plugged in properly, tryThere is a hum coming out of the speakers IR remote control seems not to functionOnly one speaker seems to be playing There is a mechanical hum coming from the unit AC mains fuse is blownMains voltage 100/120VAC Fuse type Mains voltage 230/240VAC Fuse typeCare and Maintenance Cleaning the cabinetSpecifications Dimensions Page Email classe@bwgroup.hk Email cservice@classeaudio.comEmail classe@bwgroup.com
Related manuals
Manual 46 pages 20.49 Kb

CAP-2100 specifications

The Classe Audio CAP-2100 is a remarkable integrated amplifier that stands out in the realm of high-fidelity audio equipment. Designed for audiophiles who seek a blend of exceptional performance and elegant aesthetics, this amplifier is remarkable for its combination of advanced technologies and user-friendly features.

One of the standout features of the CAP-2100 is its Class A/AB amplification, which delivers a powerful and dynamic sound signature while preserving musicality and detail. With its robust output of 100 watts per channel into 8 ohms, the CAP-2100 is capable of driving a wide range of loudspeakers with ease, ensuring that every nuance of the audio is reproduced accurately. This amplifier is engineered to handle difficult loads and deliver a clean sound that remains stable even at higher volumes.

The CAP-2100 incorporates advanced digital signal processing, which optimizes the audio reproduction for various listening environments. This technology ensures that audio is tailored to the specific characteristics of the room, offering a customizable listening experience for users. Additionally, the amplifier features a built-in DAC (digital-to-analog converter) that supports high-resolution audio formats, allowing for playback of your favorite digital files with stunning clarity and depth.

Another impressive aspect of the CAP-2100 is its comprehensive connectivity options. The amplifier provides multiple inputs, including balanced XLR and unbalanced RCA connections, making it versatile enough to accommodate various source components. This connectivity flexibility ensures seamless integration into any existing audio setup.

The design of the Classe Audio CAP-2100 is as intuitive as it is beautiful. The front panel features a sleek, minimalist aesthetic with a large volume knob and easy-to-read indicators. The build quality is excellent, with a solid chassis that minimizes the impact of external interference, further enhancing audio performance.

In summary, the Classe Audio CAP-2100 integrated amplifier is a true testament to high-fidelity audio engineering. Its combination of power, sophistication, and versatility, along with advanced technologies and user-centric design, makes it a fantastic choice for those who demand the best in their audio systems. Whether listening to your favorite vinyl record or streaming high-resolution digital music, the CAP-2100 ensures an unparalleled listening experience that will satisfy even the most discerning audiophiles.