Specifications

Directed model 200/2 300/2 250/4

RMS continuous power per channel, both chan- nels driven into 4 ohms from 20 to 20,000 Hz, with less than 0.08% Total Harmonic Distortion @ 14.4 VDC

RMS continuous power per channel, both chan- nels driven into 2 ohms from 20 to 20,000 Hz, with less than 0.1% Total Harmonic Distortion @ 14.4 VDC

RMS continuous power bridged into a 4 ohm load from 20 to 20,000 Hz, with less than 0.1% Total Harmonic Distortion @ 14.4 VDC Dynamic power rating (IHF-202 Standard) bridged into 4 ohms

50 watts	75 watts	35 watts
x2	x2	x4
75 watts	125 watts	50 watts
x2	x2	x4
150 watts	250 watts	100 watts
x1	x1	x2
200 watts	300 watts	250 watts

Signal-to-Noise Ratio	Greater than 95 dB
Frequency Response	20-20,000 Hz ± 0.5 dB
Damping Factor @ 4 ohm	Greater than 200
Crossover	Switchable high or low pass
	12 dB/octave
Bass Equalization	+8 dB, centered at 40Hz
Input Impedance	20K ohms
Input Sensitivity	Variable from 150 mV to 8 volt
Output Impedance	2 to 8 ohms, stereo
	4 to	8 ohms, bridged
Supply Voltage	10 to 16 VDC
Fusing and Power	20A	25A	25A
Minimum Cable Requirements (AWG)	#12	#10	#10
(Per amp, trunk mounted)

SPECIFICATIONS

Directed model 200/2 300/2 250/4

(Per amp, trunk mounted)