Directed Audio 250/4, 200/2, 300/2 manual Directed Electronics, Inc

Page 6

speaker load, the more heat is generated. For low impedance speaker applications or restricted ventilation installations, an external cooling fan may be advisable.

9.Battery and ground connections to the vehicle should be made with crimped ring terminals of the appro- priate size (surface area is what counts); soldering the terminals after crimping is also recom- mended.

10.Due to the high-frequency MOSFET switching power supply, filtering the power cable is not generally required (remember that the amp can’t deliver full output if the power supply is restricted). Proper grounding of the signal source is mandatory for the amplifier to reach its performance peak. If the RCA inputs are not grounded adequately via the signal source, electrical noise from the vehicle may be picked up in the system.

6

© 2003 Directed Electronics, Inc

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 200/2 Table of Contents CongratulationsLimited TWO-YEAR Consumer Warranty Features „ Selectable 12dB/octave two-way crossover„ Buffered stereo full-range RCA output jacks Installation Guidelines Directed Electronics, Inc Front Panel CONNECTIONS/CONTROLS 200/2 300/2 OFF onThis Rear Panel ConnectionsSection of this guide SourceAmplifier Connections 200/2 300/2 Rear Speaker Wiring Diagrams 200/2 300/2 Speaker Wiring Diagrams 250/4 Two Channel StereoSimultaneous Crossover Settings and Gain Adjustment Specifications Directed Electronics, Inc Vista, California Company behind this system is Directed Electronics, Inc
Top Page Image Contents