Dual BAK1500 owner manual Safety First

Page 3

INSTALLATION

Safety First

!CAUTION

The following instructions are designed to ensure safety during installation and use of the BAK1500. Failure to heed these instructions can result in injury or damage to the unit or vehicle.

The following installation instructions are intended to be used as a basic guideline. If you feel unsure about installing this speaker system yourself, Dual recommends acquiring the services of a professional car audio installation center.

Before installation, please review the following guidelines:

1.Be sure to carefully read and understand the instructions before attempting to install this product.

2.If additional wiring is required, we recommend running all wires prior to mounting your enclosure in place.

3.To ensure reliable performance and minimize signal or power loss, use the highest quality connectors available.

4.Never run speaker wires underneath your vehicle. Running speaker wires inside the vehicle provides the best protection from exhaust, heat and environmental elements.

5.Avoid running wires over, near or through sharp-edged surfaces. We suggest you also use rubber grommets to protect any wires routed through metal, especially the firewall.

6.When running the speaker cable to the amplifier, avoid running it near sources of high current (i.e. wiring harnesses, battery cables).

3

Image 3
Contents Compact Amplified Subwoofer BAK1500Getting Started Before You StartMounting Location Safety First Input Signal Power Wire +12VGround Wire GND Remote Turn-on Wire REMConnections and Controls Main Power Connections Typical Wire RoutingPhase Control Input Level Control LED Indicator Control Setup and AdjustmentTypical Below-Seat Mounting Location Mounting the SubwooferRegistration TroubleshootingWhat to do? Limited One-Year WarrantySpecifications Crossover Frequency Crossover Slope Phase Fuse DimensionsFrequency Response Ratio @ 1 watt Input Impedance