Carson 1022-10 14 V, SC-1002, 1012 manual Service, Return, Problems, Symptom Possible Cause Check

Page 11

SERVICE

This unit is designed to provide years of reliable service under even the worst conditions. Many times there may appear to be a problem with the unit when the true problem is in the speaker, controlled devices, or improper installation. The following chart shows typical symptoms and possible causes.

A blown siren fuse doesn't necessarily mean that the unit is bad. If a speaker or speaker lead is shorted this fuse will blow before the unit is damaged. Disconnect the speaker leads and replace the fuse. If the OUTPUT light comes on with siren power on and Wail mode selected the amplifier is OK. Check the speaker or leads for possible shorting.

PROBLEMS

Symptom

Possible Cause

Check

No power or siren

No power to enable input (org wire)

Does backlighting or POWER light come on?

output

Bad speaker

Is the OUTPUT light on face coming on in Wail?

 

Connector(s) loose

Is an external fuse or circuit breaker used?

 

Rear panel fuse blown

Are the negative leads connected to a good ground?

 

Loose connection at power source

 

No siren tones

Bad Speaker

Is the OUTPUT light on face coming on in Wail?

 

High Voltage Protection

Input voltage must be less than highest rated voltage.

Distorted siren

Speaker assembly loose

Is the speaker bell or tip loose?

sound

Intermittent Aux Input connection

Is the Aux Input used and wired properly?

 

Low vehicle voltage

Input voltage must be greater than lowest rated voltage.

Intermittent siren

High Voltage Protection

Is the vehicle voltage regulator working properly?

tone

Connector loose

Is the connector tight on the back of the unit?

 

Bad power connection

Is there a loose connection on a power lead?

 

Circuit breaker in supply connection

Is a circuit breaker used with at least a 50A rating?

Horn function

Horn or Manual switch stuck

Does the horn or manual switch return when released?

stuck on or

Aux Input improperly connected

Is the Aux Input used and wired properly?

Manual stuck on

Aux Input Polarity Option set wrong

Is the AUX_P option properly configured?

Wrong siren tone

Two-Tone option installed

Is the T-T option selected?

 

Tone disabled.

Check option switch settings.

Some siren tones

Tone disabled

Check option switch settings.

not working

 

 

Light switches not

Loose output connections

Do the Light Control switch indicators light?

working

Rear panel fuse blown

Is the corresponding fuse blown?

RETURN

If you have any questions concerning this or any other Carson product, please contact our Technical Service Department at (888) 577-6877. Many issues can be handled over the phone. We can also be reached via e-mail at service@carson-mfg.com

If a product must be returned for any reason, please contact our Technical Service Department to obtain a Returned Merchandise Authorization number (RMA#) before you ship the product to Carson. Please write the RMA# clearly on the package near the mailing label. Be sure to provide a return address, contact and phone number, along with a brief description of the problem.

TB0362A

Page 11 of 14

05/28/10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Technical Bulletin Light Control Input Power Siren Mode Output PowerTemperature WeightMounting Main unit InstallationSafety Precautions INSTALLER-SELECTABLE Options Will Function Electrical ConnectionsElectrical Connections ALL Models Enable Input must be connectedElectrical Connections SC-1012 only Front of UnitSC-1022 Electrical Connections SC-1022 onlyOperation LT1 and LT2 Pushbutton Switches MAN Pushbutton SwitchHorn Pushbutton Switch Return ServiceProblems Symptom Possible Cause CheckDescription Accessory DescriptionSC-1002 Parts 10 12 9 11 SC-1012 PartsSC-1022 Parts
Related manuals
Manual 16 pages 61.52 Kb

1022-10 14 V, 1012, SC-1002 specifications

The Carson 1022-10 14 V, 1012, SC-1002 is a versatile piece of equipment that has gained recognition for its innovative design and robust performance in various applications. This advanced model is engineered to meet the demands of both industrial and commercial sectors, enhancing productivity while ensuring reliability.

One of the main features of the Carson 1022-10 is its powerful 14 V motor, which delivers efficient performance across a wide range of tasks. This high-voltage capability allows for quick and effective operation, making it an ideal choice for users who require consistent energy and speed. The design incorporates a durable casing that not only protects the internal components but also ensures longevity, making it suitable for heavy-duty use.

Another remarkable characteristic of the Carson 1022-10 is its user-friendly interface. The controls are intuitively placed, allowing users to operate the machine with ease. This feature is particularly beneficial in environments where time is of the essence, as it minimizes the learning curve for new users. The SC-1002 model also includes advanced safety features, such as overload protection and emergency shut-off mechanisms, ensuring a secure working environment.

The technology integrated into the Carson 1022-10 also sets it apart from its competitors. It employs a cutting-edge energy management system that optimizes power usage, thereby increasing efficiency while reducing operational costs. This system not only helps in conserving energy but also extends the lifespan of the equipment.

Additionally, the Carson 1022-10 supports several attachments and accessories, allowing it to adapt to various tasks effortlessly. This versatility makes it a valuable asset in settings ranging from manufacturing plants to construction sites. The compatibility with multiple tools enhances its functionality, making it suitable for diverse applications.

In summary, the Carson 1022-10 14 V, 1012, SC-1002 stands out for its powerful performance, user-centric design, and advanced technology. With its exceptional features and adaptability, this model continues to be a go-to solution for professionals seeking reliability and efficiency in their operations. Whether used in manufacturing or construction, it embodies a blend of power and precision that meets the evolving needs of today’s industries.
Top Page Image Contents