Speaker Installation

6	Speaker Installation

IWTS-14 SR and 30 SR High Performance In-Wall Surround Speakers

Removing and Installing the Grille

NOTE: We always recommend a professional be involved in the instal- lation of the IWTS SRs.

Installation of the IWTS SRs in New Construction with Optional Bracket

For new construction,we highly recommend that you use the optional IN-NC-14/30SR New Construction Bracket.

The lip on the New Construc- tion Bracket must face outwards into the room.Sheetrock is then installed up to the lip, leaving a perfectly-defined mounting hole for the speakers.

Use a level to get it straight; this can't be fixed later.

Installation of the IWTS-14 SR and 30 SR in Existing Construction

The IWTS SRs can be easily mounted in most any stan- dard wall material, from ½ to 1½ inches thick.The IWTS SR rotating wall clamps firmly fix it to the wall surface after the proper cutout has been made. An important precaution to take before mounting:

Keep the top and bottom of the actual mounting hole at least 1½ inches away from beams or studs to ensure that the clamps have adequate room to rotate. A crossbrace or other obstruction that’s too close will stop them from properly doing their job.

Remove the grille from the speaker using an awl or the point of a drywall screw in a grille opening near one of the grille corners.Slowly pry the grille out, being careful not to damage the speaker’s frame or its finish.

To re-install the grille later,press it carefully into the appropriate opening in the frame assembly. Since it’s designed to fit snugly, please take your time and use care when installing the grille.

Cutting the Opening

IWTS-14 SR	10 3⁄4”
IWTS-14 SR	(273mm)
and IWTS-30 SR
Mounting Template
	14 1⁄4”
	(362mm)
	015-1214

After determining the best location for the speaker as outlined above, use the enclosed template to cut the proper size hole.

10¾ x 14¼” (273 x 362mm)

WARNING: Exercise extreme care before making any wall cuts to ensure that you will not cut through any wires, pipes, or other items that may be in the wall. You may sometimes, but not always, be able to determine the approximate location of wires and pipes by looking at the locations of nearby outlets and plumbing. But their location or absence is never an assurance that there is not something within the wall cavity.

IWTS-30 SR, IWTS-14 SR specifications

Atlantic Technology has long been recognized for its innovative audio solutions, and two standout offerings in their lineup are the IWTS-14 SR and IWTS-30 SR in-wall speakers. Designed for high-performance sound and seamless integration into home environments, these speakers provide a compelling option for audio enthusiasts and home theater enthusiasts alike.

The IWTS-14 SR is a two-way in-wall speaker that features a 1-inch soft dome tweeter and a 4.5-inch carbon-composite midrange driver. This configuration delivers a balanced sound profile, ensuring that vocals, instruments, and sound effects are reproduced with clarity and precision. The speaker is designed to handle a wide frequency range, making it suitable for various listening scenarios, from movies to music. Its unique coaxial design allows for broad dispersion, ensuring that sound is evenly distributed throughout the room.

On the other hand, the IWTS-30 SR takes performance a step further. This model features a 1-inch dome tweeter paired with dual 6.5-inch woofers, providing enhanced bass response and dynamic range. The increased driver size allows the IWTS-30 SR to produce deeper low frequencies, making it an ideal choice for those looking to create a cinematic experience in the comfort of their own homes. The speakers are also equipped with Atlantic Technology's proprietary technologies, such as the "Waveguide" tweeter technology, which further improves dispersion and detail in high-frequency response.

Both models are engineered with installation flexibility in mind. Their low-profile design allows for easy integration into any room, and the paintable grilles ensure they can seamlessly blend with any decor. The IWTS series also features Atlantic Technology's unique installation brackets, simplifying the mounting process and enabling precise placement for optimal listening positions.

Additionally, both the IWTS-14 SR and IWTS-30 SR are built to last. The materials used in their construction are durable and designed to withstand the test of time, even in high-performance scenarios. These speakers also come with Atlantic Technology's thoughtful design choices, such as a stylish bezel that enhances the overall aesthetics of the installation.

In summary, the Atlantic Technology IWTS-14 SR and IWTS-30 SR in-wall speakers are exceptional choices for anyone looking to enhance their home audio experience. With their powerful performance, innovative technologies, and discreet design, these speakers promise to deliver high-quality sound that perfectly complements any home theater setup or audio environment. Whether you're a movie buff, a music lover, or both, these speakers are engineered to elevate your listening experience.