Changing the Picture Options

1.Press the MENU button to display the menu. Press the ENTER button, to select "Picture".

2.Press the ▲ or ▼ button to select “Picture Options”, then press the ENTER button.

3.Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.

4.When you are satisfied with your setting, press the ENTER button.

5.Press the EXIT button to exit.

➣In PC mode, you can only make changes to the

“Colour Tone” and “Size” from among the items in “Picture Options”.

♦Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2

You can select the most comfortable colour tone to your eyes.

➣The adjusted values are stored according to the selected Picture mode.

➣“Warm1” or “Warm2” is only activated when the picture mode is "Movie".

You can select the picture size which best corresponds to your viewing requirements.

♦Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.

♦16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.

♦Wide Zoom: Magnify the size of the picture more than 4:3.

♦Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.

♦4:3: This is the default setting for a video movie or normal broadcasting.

♦Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i) or Component (1080i) signals are input.

➣"Auto Wide" function is available only in "TV", "DTV", "Ext." and "AV" mode.

➣In PC Mode, only "16:9" and "4:3" mode can be adjusted.

➣Settings can be adjusted and stored for each external device you have connected to an input of the TV.

➣Temporary image retention may occur when viewing a static image on the set for more than two hours.

➣Wide Zoom: Move the screen up/down using the ▲ or ▼ button after selecting the by pressing the ► or ENTER button.

➣Zoom: Select by pressing the ◄ or ►button.

Use the ▲ or ▼button to move the picture up and down. After selecting ,

use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.

➣After selecting “Just Scan” in HDMI (1080i) or Component (1080i) mode:

Select by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.

Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button. You can initialize the setting.

OYou can select these options by simply pressing the P.SIZE button on the remote control.

English - 18