DVD Transport Buttons, Setting Button, Power Button

DVD Transport Buttons

Six rectangular buttons provide standard trans- port controls for the DVD player: OPEN/ CLOSE, TRACK UP/DOWN, STOP, PLAY, and

PAUSE.

SETTING Button

The SETTING button steps through various configuration options which should be set after initial installation of the RSDX-02, including the number and size of the speakers, subwoofer settings, etc.

ADJUST button

The ADJUST button steps through the available adjustments that can be made while using the RSDX-02.

MEMORY Button

Press the MEMORY button to store adjustments, settings, or memorized AM/FM presets.

CONTROL Buttons

Four cursor buttons used in navigating settings and adjustment s. Use the UP/DOWN buttons to scroll through lists of options. Use the LEFT/ RIGHT buttons to change a setting.

For example, to tune a radio station while in FM mode, press the UP/DOWN buttons un- til the word TUNING appears in the display. Then, use the LEFT/RIGHT buttons to tune to a new station frequency.

Remote Sensor

This sensor receives IR signals from the remote control. Do not block this sensor.

Remote Control Overview

See Figure 2

The RSDX-02 includes a full-function touch screen universal remote control that can op- erate the RSDX-02 and other audio/video components.

A separate manual gives detailed instructions on programming and using the RR-1070 to replace all of the remote controls in your sys- tem. The RR-1070 manual covers many extra features (such as custom labeling of remote buttons that appear in its LCD display). To avoid duplication, we provide only basic informa- tion about using the RR-1070 to operate the RSDX-02 in this manual.

NOTE: Some of the RSDX-02 functions appear on the front panel and the remote. Through- out this manual, letters in gray boxes refers to the labeled illustration of the remote at the front of this manual; numbers in gray boxes refer to the front panel illustration.

The remote control includes five hard buttons POWER, CHANNEL UP/DOWN, and VOL- UME UP/DOWN. The other remote control commands are used by touching “virtual” buttons appearing on the large touch screen panel on the remote.

Programming the RR-1070 MENU Button

See Figure 2

Before using the the RR-1070, you may need to program it to operate the RSDX-02. Detailed programming instructions are contained in the separate remote control owner’s manual. Or, follow these simple instructions:

1.Touch the MENU command at the bottom left of the touch-screen on the remote.

2.Touch the SETUP command on the touch screen.

3.Touch the BRAND NAME command on the touch screen.

4.Touch the ROTEL command on the screen.

5.Select and touch the RSDX-02 US command on the touch screen and wait afew seconds.

6.Touch the OK command on the touch screen and wait afew seconds.

7.Touch the HOME command at the bottom center of the touch screen.

English

Using the RR-1070

ROTEL Button

See Figure 2

To use the RR-1070 remote with the RSDX-02, press the ROTEL virtual button on the home page of the remote control. The touch screen display will change to the first of six pages of commands for the RSDX-02. Each page is identified by the name ROTEL at the top.

If you do not see one of the Rotel touch screen pages, press the HOME virtual button on any page to return to the home page where you can press the ROTEL button.

Changing Pages

PAGE Buttons

See Figure 2

There are six pages of touch screen commands for the Rotel RSDX-02. From any of these pages, press the up or down PAGE buttons at the bottom of the touch screen to move forward or back to the next page. Each page number is displayed between the two PAGE buttons, for example: PAGE 1/6 indicating the first of six available pages.

Throughout this manual, remote control com- mands that are available on any of these pages or on the remote’s hard buttons are indicated with a single letter in a gray box, referring to the remote illustration (Figure 2) at the front of this manual. Commands which appear only on of the six Rotel pages will be indicated with the page number followed by a letter, for

example: indicating a command on Page

3.Again these indicators appear on the re- mote illustration for easy reference.

POWER Button

The POWER hard button on the remote pro- vides the same function as the STANDBY but- ton on the front panel. Press the button once to activate the unit; press again to put the unit into standby mode.

VOLUME Buttons

Two hard buttons on the remote, labeled VOL

+and VOL –, control the master VOLUME, adjusting the output level of all channels simul- taneously.