Specifications

RSDX-02DVD Receiver

Amplifier

Output Power, Stereo Operation:

80 W per ch, min. RMS, 8 ohms, 40 Hz – 20 kHz with no more than 0.8% total harmonic distortion.

Output Power, Surround operation:

80 W per ch, min. RMS, 8 ohms at 1 kHz, with no more than 0.8% total harmonic distortion.

Audio

Audio Input Sensitivity/Impedance (1 kHz):

TV, TAPE/CDR, DBS, VCR: 240 mV/47 kOhm

Audio Input (DIGITAL IN):

Coaxial: 0.5 V(p-p)/75 ohms

Optical: –21 dBm to –15 dBm (660 nm ±30 nm)

Digital formats:

Linear PCM, Dolby Digital, and DTS (with sampling frequency–32 kHz, 44.1 kHz, 48 kHz)

Signal-to-Noise Ratio (’66 IHF/’78 IHF): TV, TAPE/CDR, DBS, VCR: 87 dB/67 dB

Frequency Response:

TV, TAPE/CDR, DBS, VCR: 20 Hz to 20 kHz (±1 dB)

Tone Control:

Bass (100 Hz): ±10 dB

Treble (10 kHz): ±10 dB

Video

Video Input Sensitivity/Impedance (1 kHz): Composite video: 1 V(p-p)/75 ohm

S-Video: (Y:luminance): 1 V(p-p)/75 ohm

S-Video: (C:chrominance): 0.286 V(p-p)/75 ohm

Video Output Level/Impedance (1 kHz): Composite video:1 V(p-p)/75 ohm

S-video (Y:luminance): 1 V(p-p)/75 ohm

S-video (C:chrominance): 0.286 V(p-p)/75 ohm

Component video (Y): 1.0 V(p-p)/75 ohm

Component video (PB/PR): 0.7 V(p-p)/75 ohm

Color System:

NTSC or PAL

Horizontal Resolution:

500 lines or more

Signal-to-Noise Ratio (S/N):

63 dB

Synchronize:

Negative

FM tuner (IHF)

Tuning Range:

87.5 MHz to 108.0 MHz

AM tuner

General

Power Requirements:

AC 120 V , 60 Hz

Power Consumption:

200 W

2 W (in standby mode)

Dimensions (W x H x D):

435 mm x 118 mm x 415 mm

(17 3/16 in. x 4 5/8 in. x 16 3/8 in.)

Weight:

9.6 kg (21.2 lbs)

All specifications are accurate at the time of printing.

Rotel reserves the right to make improvements without notice.

Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan.

Tuning Range:

530 kHz to 1 710 kHz