Rotel RSDX-02 owner manual Basic Operations

Page 20

RSDX-02DVD Receiver

CHANNEL Buttons

Two hard buttons on the remote control, la- beled CH + and CH –, are used when oper- ating the RSDX-02’s DVD player or AM/FM Tuner. In DVD mode, these buttons are used to select the next Track, backward or forward. In AM/FM mode, the buttons tune up or down.

HOME Button

The HOME virtual button appears at the bot- tom of the touch-screen on every ROTEL or other device page. Press HOME to return to the main touch-screen page.

MUTE Button

The MUTE virtual button also appears at the bottom of the touch-screen on every ROTEL page. Press the MUTE command to temporarily reduce the volume level to zero. Press the button again to restore the volume to the previous setting.

Basic Operations

This section covers the basic operating con- trols of the RSDX-02 and the remote.

Power On/Off

The RSDX-02 has a STANDBY button on the front panel and a POWER hard button on the remote. Press either button to turn the unit on. The front panel LCD display lights up.

Press either button again to turn the unit off. When turned off, the RSDX-02 remains in a low current standby mode. The LED above the STANDBY button the front panel lights when the unit is in standby mode.

NOTE: To completely power off the RSDX-02 when away from home for a long period of time, unplug the unit from the AC wall outlet.

The RSDX-02 also has a sleep function which turns the unit off after a specified amount of time (see the following topic). There is also an auto standby function that can automatically turn the unit off (only when using the DVD player) 30 or 60 minutes after the disc is stopped.

20

SLEEP Timer P6-F

The RSDX-02 sleep function turns the unit off automatically after a specified amount of time. Press the SLEEP command on page 6 of the remote to activate the sleep function. Each ad- ditional press of the button increases the length of time before the unit turns off.

1st press: 10 minutes

2nd press: 20 minutes

3rd press: 30 minutes

4th press: 60 minutes

5th press: 90 minutes

6th press: 120 minutes

7th press: 150 minutes

8th press: 0 minutes (sleep timer cancelled)

A SLEEP indicator and with the amount of time is shown in the front panel display. The time remaining before the sleep timer turns the unit off can be displayed with a single button press.

Volume Adjustments

The listening volume of the RSDX-02 can be adjusted from the front panel or the remote.

Front Panel: Rotate the front panel VOLUME control clockwise to increase the volume, coun- terclockwise to decrease.

Remote: Press the VOL UP hard button to in- crease the volume; press the VOL DOWN hard button to decrease.

When you adjust the volume, the setting is shown on the front panel display.

Muting the Sound

The volume of the RSDX-02 can be temporarily turned off or muted. Push the MUTE command on the remote once to mute the sound. The word MUTING appears in the front panel display. Press the MUTE command again to restore pre- vious volume levels.

NOTE: Adjusting the VOLUME controls on ei- ther the front panel or the remote also restores the volume when the RSDX-02 is muted.

Changing Display Brightness

P2-C

There are two brightness settings for the front panel display. Press the DIMMER command on Page 2 of the remote to toggle between the bright and dim display settings.

Selecting Source Inputs

Up to six source components, including the built- in DVD player and FM/AM tuner, can be se- lected for listening and/or viewing with the RSDX-02. Selecting a source input can be done from the front panel or the remote control.

Selecting an Input from the Front Panel

To select an input source from the front panel, press any of the six input selector buttons. The name of the selected input appears in the front panel display.

NOTE: When the TAPE/CDR button is pressed, either TAPE or CDR appears in the front panel, depending on which name is assigned to the input. See Changing Input Name below.

Selecting an Input from the Remote

To select an input from the remote control, push any of the input source commands on Page 1 or Page 2.

Four of the inputs (DVD, DBS, TV, CDR) are available on Page 1 of the remote screens. An additional three inputs (FM/AM, TAPE, VCR) are available on Page 2.

The name of the selected source appears in the front panel display.

NOTE: Either the TAPE or the CDR input is avail- able depending on which name has been assigned to the input. See Changing Input Name below.

Changing Input Name

The TAPE/CDR inputs can be used for a CDR (compact disc recorder) or TAPE (analog tape recorder). The correct name (TAPE or CDR) should be correctly assigned to these inputs so that the name appears in the display, so that the INPUT buttons on the remote work as expected, and so that digital inputs are avail- able for use with a CDR. As delivered from the factory, the RSDX-02 has the TAPE name assigned to these inputs. To change the input name to CDR:

1.Select the TAPE/CDR inputs by pressing the TAPE/CDR input button.

2.Press and hold the TAPE/CDR button until the words ASSIGN. CDR appear in the front panel display.

Image 20
Contents RSDX-02 RSDX-02 Important Safety Instructions FCC InformationRSDX-02DVD Receiver Controls and ConnectionsRR-1070 Remote Control EnglishConnecting the Speakers Dolby, Pro Logic, MLP Lossless, and the double-DConnecting the TV Connecting a Cable, Satellite, or Hdtv set-top boxConnecting a VCR Connecting a CD Player/CDR RecorderConnecting an Analog Audio Tape Recorder Connecting AM and FM antennaeParental Lock Country Codes English Contents Picture Menu SpecificationsMP3 and Jpeg files About Rotel Getting StartedCable selection Video ConnectionsDigital Audio Left channel audio white Right channel audio redConnecting Speakers Connecting a SubwooferConnecting the TV Monitor Setting the PAL/NTSC SwitchVCR or Digital Video Recorder CD Player/CDR RecorderAudio Tape Recorder AM AntennaVolume Control Surround Mode ButtonFM Antenna AC InputSetting Button Adjust buttonUsing the RR-1070 Rotel Button Power ButtonBasic Operations Surround Modes Manually Selecting Surround Modes Tuner ControlsAbout Discs Playing DVDs Advanced Features Setting Video Picture Adjustments VFP P6-EP1-D Selecting a Scene AngleSelecting Subtitles P3-C Selecting Audio Tracks P3-DSelecting a Title/Group Entering a Scene NumberFind a Location with Time Search P1-D Repeat Play P1-DP3-EQuick Setup Additional Jpeg featuresRandom Play P1-D Program Play P1-DSetup Procedure Subwoofer Setting SubwfrSpeaker Settings Delay SettingsCrossover Frequency Setting Cross LFE Attenuation Setting LFEAutomatic Surround Mode Auto SR Dynamic Range Compression D.COMPQuick Setup Video Output Mode VoutTone Adjustments Bass and Treble From the remote controlUsing the Choice Menus Speaker LevelsDSP Effect Level Effect P5-F Subwoofer Audio Position Audio POS P2-HP1-DLanguage Menu Picture MenuAudio Menu Size LevelCrossover DistanceOthers Menu ResumeOn-Screen Guide Auto StandbyTo Change Parental Lock Settings Playback with Parental LockSpecifications Rotel Deutschland Rotel of AmericaRotel Europe