Samson RSX215, RSX115, RSX110, RSX1185, RSX112 owner manual Key Features

Page 7

Key Features

RSX215 (Dual 15" Two-way passive loudspeaker system)

1200 watts AES / 4800 watts peak power handling

Dual 15" (380 mm) low-frequency drivers with 3" (76 mm) voice coils

• 1.75" (44 mm) Celestion PEPT high performance compression driver

• 60° x 90° horn with 1" exit for a controlled, consistent sound

2 x Speakon® and ¼” phone parallel speaker jacks

Twelve M10 (10 mm) fly points

Trapezoidal, plywood construction with durable black textured paint finish

RSX118S (18" Passive Subwoofer)

• 500 watts AES / 2000 watts peak power handling

• 18" (380 mm) low-frequency woofer with 3" (76 mm) voice coil

2 x Speakon® parallel speaker jacks

96dB SPL sensitivity

Pole-mount receptacle to stack satellite loudspeakers

• Plywood construction with durable black textured paint finish

RSX Passive Loudspeakers

7

Image 7
Contents RSX Passive Loudspeakers Page Safety Instructions Table of Contents Introduction Key Features Key Features Typical Impedance Calculations Input ConnectionsBasic Set Up Using Speaker Stands Floor Monitor Positioning Mono Sub Operation Configuring the RSX118S SubwooferUsing an External Crossover Permanent Installation Cable Wiring LF Driver Technical SpecificationsModel RSX115 RSX215 Power Rating RSX118S RSX Passive Loudspeakers