Basic Set Up

The RSX loudspeakers are passive cabinets, which means that they need to be connected to a power amplifier to reproduce an audio signal. Each speaker cabinet features parallel connectors which enable each cabinet to be daisy chained to an additional loudspeaker. When connecting multiple speakers to a power amplifier or powered mixer, you must pay attention to the mini- mum load impedance of the amplifier. Most amplifiers can safely provide power to loudspeakers with a minimum load impedance of 8 or 4 ohms. The RSX loudspeakers are rated at 8 ohms. This means if two RSX cabinets are wired in parallel, the nominal impedance of the speaker system will be 4 ohms.

SX 1800

400 W
600 W
Left Output	Right Output

Mono/Sub Output

SX 1800

400 W

600 W

RSX Passive Loudspeakers