Mounting Location S, Battery and Charging

MOUNTING LOCATION S

The mounting location and position of your amplifier will have a great effect on its ability to dissipate the heat generated under normal operation. The design of our cast aluminum heatsink serves to easily dissipate the heat generated over a wide range of operating conditions. However, to maximize the performance of your amplifier, care should be taken to ensure adequate ventilation.

Trunk Mounting

Mounting the amplifier vertically on a surface with the fin grooves running up and down will provide the best cooling of the amplifier.

Mounting the amplifier on the floor of the trunk will work but provides less cooling capability than vertical mounting.

Mounting the amplifier upside down to the rear deck of the trunk will not provide proper cooling and will severely affect the performance of the amplifier and is strongly not recommended.

Passenger Compartment Mounting

Mounting the amplifier in the passenger compartment will work as long as you provide a sufficient amount of air for the amplifier to cool itself. If you are going to mount the amplifier under the seat of the vehicle, you must have at least 1" (2.54cm) of air gap around the amplifier's heatsink.

Mounting the amplifier with less than 1" (2.54cm) of air gap around the heatsink in the passenger compartment will not provide proper cooling and will severely affect the performance of the amplifier and is strongly not recommended.

Engine Compartment Mounting

Rockford Fosgate amplifiers should never be mounted in the engine compartment. Not only will this void your warranty but could create an embarrassing situation caused by the ridicule from your friends.

BATTERY AND CHARGING

Amplifiers will put an increased load on the vehicle's battery and charging system. We recommend checking your alternator and battery condition to ensure that the electrical system has enough capacity to handle the increased load of your stereo system.

NOTE: This amplifier utilizes a large array of power supply capacitance and can draw substantial current at turn-on. The dashboard BATTERY VOLTAGE and/or ALTERNATOR CHARGE lamp may illuminate for a brief period while momentarily recharging the capacitor bank. This may be most noticeable when the amplifier is off for at least a day or two and is considered normal operation.

– 8 –

500.2 specifications

The Rockford Fosgate 500.2 is a powerful, high-performance amplifier that embodies the brand's signature commitment to quality and innovation in the world of car audio. Designed for audiophiles and casual listeners alike, this amplifier can dramatically enhance the sound experience in your vehicle, making it a popular choice for many car enthusiasts.

At the heart of the Rockford Fosgate 500.2 is its robust power output. The amplifier delivers a remarkable 250 watts per channel at 2 ohms, which ensures that even the most demanding speakers receive ample power. This efficiency allows users to enjoy loud and clear sound without distortion, even at higher volumes. The amplifier's dynamic power management ensures that the audio performance remains consistent across various listening scenarios.

One of the standout features of the 500.2 is its Smart Technology, which includes built-in thermal protection and short circuit protection. This design not only prolongs the life of the amplifier but also enhances performance by preventing overheating and damage during extended use. This is especially beneficial for users who love listening to music at high volume for prolonged periods.

The 500.2 also features a variable high-pass and low-pass crossover, allowing for precise sound tuning. Whether you are aiming for deep bass or crisp highs, the adjustable crossover settings enable users to customize their audio experience to their liking. With a frequency response range of 20 Hz to 20 kHz, this amplifier is versatile enough to handle a wide array of musical genres and audio formats.

Additionally, the amplifier's compact design allows for easy installation in various vehicle types without sacrificing valuable space. Its sleek and stylish chassis not only provides durability but also adds an aesthetic touch to your audio setup.

Lastly, the Rockford Fosgate 500.2 is built with quality materials that make it reliable and long-lasting. The unit's professional-grade construction ensures that it can withstand the rigors of daily use in a car environment. Overall, the Rockford Fosgate 500.2 is an excellent investment for anyone looking to upgrade their car audio system, offering powerful sound, innovative technology, and customization features that cater to both casual listeners and serious audiophiles.