Rockford Fosgate 500.2 manual EZ-Bridged Operation

Bridged Operation				RCA
				Input
L				L	R		R
			(Mono)
Speaker	Gain	Bass			Balanced		Gain	Speaker
+ L –	Phase	EQ		L	R	Input		–	R	+
	0 – 180°	Balanced		Pass Thru	Pass Thru		EZ Bridged 180°- 0°
		Unbalanced
+										–
Speaker										Speaker
Terminal				+		–				Terminal
				4Ω min.
• RCA inputs are connected to both left and right channels
• Signal Input Switch selected to Unbalanced for RCA input
• Left Phase Switch set to 0°
• Right Phase Switch set to 180°
• Inverting the right signal will allow the bridged woofer to operate correctly
• Gain for left and right channels set equally to balance the subwoofer
• Impedance for bridged channel should be 4Ω minimum
• XCard is in High-Pass,Low-Pass or Full Range position

EZ-Bridged Operation	Mono
	Input

	L			L	R		R
			(Mono)
Speaker	Gain	Bass				Balanced	Gain	Speaker
+ L –	Phase	EQ		L	R	Input		– R +
	0 – 180°	Balanced		Pass Thru	Pass Thru		EZ Bridged 180°- 0°
		Unbalanced

+			–
Speaker			Speaker
Terminal	+	–	Terminal

4Ω min.

•RCA input is connected to L (Mono) input

•Signal Input Switch to Unbalanced for RCA input

•Left Phase Switch at 0°

•Right Phase Switch set to E-Z Bridge for the following to occur: L (Mono) RCA input to drive both the left and right channels

Left Gain will control both the left and right channels

Right Phase will be inverted 180° which will allow the bridged woofer to operate correctly

•Impedance for bridged channel should be 4Ω minimum

•XCard is in the High-Pass,Low-Pass or Full Range position

–18 –

I

N S T A L L A T I O N