Power/Speaker Side

GND	AP	B+	+ R –	+ L	–	– R +	– L +
			– B r i d g e d			+ – B r i d g e d +
							for 4600x model

5.Power/Speaker Connectors

The gold-plated terminal block connectors are: GND Supplies ground to the amplifier.

AP The amplifier is turned on by connecting the remote turn- on wire to the source unit's “Auto Antenna” or remote turn-on lead, either of which should go to +12 volts when the source unit is activated.

B+ Supplies power to the amplifier.

+R– Connect the Right and Left channel outputs to the

+L– speakers.

The terminal block connector accepts wire sizes from 10 gauge to 20 gauge. *

Spade connectors are not needed because of the design of the connector. The installer should be careful not to allow wires to fray or touch. The recommended strip length is 1/4" (.635cm).

*Rockford Fosgate’s Perfect Interface line of accessories includes high quality power and speaker wire, gold-plated RCA interconnecting cables and other products to complete your installation. Ask your Authorized Rockford Fosgate Dealer about Perfect Interface.

– 5 –