OPERATION
In this case, you also need to consider if the IR (10) is available.
Fig. 4
-When the display turns downward to a certain angle, it will draw in.
Fig. 5
•SELECTING RECEIVING MODE Press TV/AV button (22) to select among AV1/AV2/TV.
•SELECTING CHANNEL
-Press CH + button (28) or CH – button (29) to choose channel upward or downward.
-The numeric buttons (0, 1 ~ 9) (23) allow you to select the correspinding channel directly.
-Press digital select button
•PICTURE ADJUSTMENT/PROGRAM SETTING/SYSTEM CONTROL
In TV mode, press MENU button (36) to enter the main menu. And the menu includes three
PICTURE MENU, TUNER MENU and
SYSTEM MENU.
Press the button repeatedly or press
/ 
buttons (37) to select the desired item then press 
/ 
buttons (38) to enter the corresponding
- In PICTURE MENU, use 
/ 
buttons (37) to select picture mode upward or downward as follows:
BRGIHT 
CONTRAST 
COLOR 
SHARP 
TNIT
Then use 
/ 
buttons (38) to adjust the selected item.
Note: In PAL SYSTEM, there is no “TINT” item.
-In TUNER MENU, use 
/ 
buttons (37) to select picture mode upward or downward as follows:
POS 
SKPI 
BAND 
FNIE 
AFT 
SEARCH 
ASM
Then use 
/ 
buttons (38) to adjust the selected item.
-In SYSTEM MENU, use 
/ 
buttons (38) to select picture mode upward or downward as follows:
COLOR 
SOUND 
LANG. 
B/B 
CORNIG 
HALFTONE
Then use 
/ 
buttons (38) to adjust the selected item.
In AV mode, press MENU button (36), the screen will display PICTURE MENU and SYSTEM MENU but not TUNER MENU. And in SYSTEM MENU, there is no “SOUND” item. The setting method is the same with that in TV mode.
Note: In the menus (except TUNER MENU), if you don’t operate over 6 seconds, the screen display will disappear.
13