Precautions

Please read this manual completely and carefully prior to attempting to install your new car video equipment. Install correctly, your new equipment will provide you with year of enjoyable and safe usage.

Installation of this equipment in any portion of a vehicle which impairs or distracts the driver is improper and dangerous. We assumes no liability whatsoever for failure to follow the proper installation of this products.

1.Do not operate this equipment while driving-safe driving should always be your highest priority.

2.Do not install components in areas which are susceptible to rain, moisture direct sunlight, extreme heat or cold, excessive dust, dirt or humidity.

3.Immediately unplug the power cord and send the monitor to your local dealer or service center as soon as possible:

a)if there is smoke or any peculiar odor present during use

b)if there is damage to any of the internal components

4.To avoid damage to the monitor and risk of electronic shock, do not permit any of this equipment to become damp or wet from water or liquid. If this does occur, immediately unplug the power cord and send the monitor to your local dealer or service center as soon as possible.

5.Do not attempt to repair, open or dissemble any of the components. Dangerous high voltages are present which may result in electric shock.

6.Use only a power source with 12 volts DC (negative ground).

7.Do not place objects on or suspend objects from the power cord, as this may damage the cord.

8.Do not twist or place the power cord near any source of heat in the vehicle.

9.Do not attempt to repair a damaged, broken or faulty power cord. Replace it with a new one immediately.

10.Avoid dropping any metal objects or inflammable items into the monitor ventilation slots.

11.After the monitor is installed, do not arbitrarily pull it down or strike it. This may loosen the mounting screws and cause it fall down.