PYLE Audio PLVS7HM manual Step of install sun-visor housing, Cut the visor

Page 12

Step of install sun-visor housing

Setup work

remove the visor and set it in an uncluttered work area. Take the appropriate precautions to ensure that it is not damaged during the installation.

Measurements

Push on the headrest with your fingers to make sure there are no obstructions that would hinder the installation. Use the paper template to mark the area to be cut.

Cut the visor

using an adjustable-depth blade, start your cut 1/4 inch inside one corner and cut diagonally across, stopping 1/4 inch in from the other corner. Repeat the procedure for the other two corners.

Image 12

Contents 7INCH Wide TFT LCD Monitor Precautions Control and layout for the monitor Control and layout for the remote control Function Page Installation Power Cord Female Remote Control replacing batteriesPage Step of install headrest housing Setup workMeasurements Cut the headrestRemove foam & obstructions Page Step of install sun-visor housing Cut the visorInstall the sun-visor housing Route the cable through the visorPage Page Display Size 7 Inch Wide Screen Diagonal