PYLE Audio PLCD15MR owner manual Specification, General, CD Player, Radio

Page 12

SPECIFICATION

GENERAL

Power Supply Requirements	: DC 12 Volts, Negative Ground
Chassis Dimensions	: 178 (W) x 178 (D) x 50 (H) mm
Tone Controls	: ± 10 dB
- Bass (at 100 Hz)	: ± 10 dB
- Treble (at 10 KHz)	: ± 10 dB
Maximum Output Power	: 4 x 40 Watts
Current Drain	: 15 Ampere (max.)

CD PLAYER

Signal to Noise Ratio	: More than 55 dB
Channel Separation	: More than 50 dB
Frequency Response	: 40 Hz - 18 KHz

RADIO

		FM
Frequency Coverage	: 87.5 to 107.9 MHz
IF	:	10.7 MHz
Sensitivity (S/N = 30 dB)	:	3 ∝V
Stereo Separation	:	> 30 dB

		AM
Frequency Coverage	: 530 to 1720 KHz
IF	:	450 KHz
Sensitivity (S/N = 20 dB)	:	32 dBu

12

Image 12

Contents PLCD15MR Contents Installation Take OUT Screw Before InstallInstalling the unit DIN FRONT-MOUNTDashboard Nut 5mm Spring washer Screw 5x25mm Strap Plain washerRemoving the unit Using the Detachable Front Panel Press the Open button, the front panel will slide downWiring Connection For 4 x 40W SystemOperation General OperationSelect Mode ResetLoudness IlluminationRadio Operation CD Operation CD Changer Operation Press AS/PS Elapse button 2 to show running time of trackSelect Disc Specification GeneralCD Player RadioTrouble Shooting Symptom Cause Solution88-C1802-xx