INSTALLATION
1
6
2
35
7
4
(Fig. 2)
1.Dashboard
2.Nut (5mm)
3.Spring washer
4.Screw (5x25mm)
5.Screw
6.Strap
Be sure to use the strap to secure the back of the unit in place. The strap can be bent by hand to the desired angle.
7.Plain washer
Removing the unit
1
Front Panel
OPEN button
2
1.Before removing the unit, press the OPEN button to slide down the front panel.
2.Lever
Insert the levers supplied with the unit into the grooves in the housing as shown in figure until they click. Pulling the levers makes it possible to remove the unit from the dashboard.
4