PYLE Audio PLCD15MR owner manual Using the Detachable Front Panel

Page 5

USING THE DETACHABLE FRONT PANEL

To Detach the Front Panel

1.Press the OPEN button, the front panel will slide down.

To Reinstall the Front Panel

1.When the panel bracket is in slide down position, insert the front panel into the panel bracket and push the front panel from the middle to slide it up.

Open

2.When the front panel slides down, press the bottom button of the front panel upward and pull it out from the panel bracket.

Bottom

Button

3.For safekeeping, store the front panel in the supplied protective case immediately after being removed.

Protective Case

Front Panel

Bottom

Button

2.When the panel bracket is in slide up position, insert a side of the front panel to its proper position and push another side into the panel bracket, a ‘click’ sound should be heard.

Front Panel

3.Note that if the front panel fails to lock in position properly, pressing control button may not function and LCD display may be missing some segments. Press the OPEN button and then re-install the front panel again.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents PLCD15MR Contents Take OUT Screw Before Install InstallationInstalling the unit DIN FRONT-MOUNTRemoving the unit Dashboard Nut 5mm Spring washer Screw 5x25mm StrapPlain washer Press the Open button, the front panel will slide down Using the Detachable Front PanelFor 4 x 40W System Wiring ConnectionGeneral Operation OperationReset Select ModeLoudness IlluminationRadio Operation CD Operation Select Disc CD Changer OperationPress AS/PS Elapse button 2 to show running time of track General SpecificationCD Player RadioSymptom Cause Solution Trouble Shooting88-C1802-xx
Top Page Image Contents