PYLE Audio PLDVCR600 While recording and playing, Top of screen extremely waves, Impossible, Work

Symptom	Checks
While recording and playing, the	- a Since VCR Play signals are not stable like a TV signals, screen
top of screen extremely waves.
A screen is not clear.	- a In case videotape is the one recorded by other products or old
	one, stripe may appear on the screen.
	- a Try to adjust the screen by [TRACKING+/-] button
	- a Try to use a head-cleaner.
A screen at pause is trembling or	- Try to use a head-cleaner.
slow screen is not clear.	- a Try to adjust the screen
Recording a TV program is	- a For recording, you should use videotape with a tab.
impossible.	- a Please check whether a channel is fixed on video. If not, you
	have to turn it into “TV”by pressing “OUTPUT”button.
	- a Are RF cables inputted antenna connection terminal correctly?
	- a Does a CH number selected in display section appear?
	- a Please check a tab on a tape whether it is broken or not. (If it was
	broken, please scotch-tape it)
	- a Check whether a tape attached with a recording tap is inserted.
	- a Check whether the screen is displayed in VCR Only Channel.
	Press [OUTPUT] button in this remote controller to adjust in
	"General Broadcast" condition.
	- a Is the rounded line (RF cable) connected in "ANT.IN" terminal?
	- a Is the selected channel number shown in Display?
	- a Is a tab of cassette tape broken? (Please cover a tab hole with
	cellophane adhesive tape (Scotch tape).)
In spite of pressing “CHANNEL”,	- a You may not memorize channels.
a channel can not be set.	- a Please check your channel setting or press a number button.
While duplicating, screen is not	- a Some tapes or discs distributed in the market for lending is set to
clean and distorted.	prevent copy in manufacturing. These tapes cannot be
	duplicated in a good condition.
remote control does not work.	- a Battery may be weak or exhausted.
	- a A receiver of remote control may be different with a sender.
Buttons on remote control do not	- a In case a videotape is positioned in the beginning, “VISS REW”
work.	and “REW”do not work.
	- a In case a videotape is positioned in the end, “FF”, “VISS FF”,
	“PLAY”and “REC”do not work.
	- a Please check whether another button is pressed.
Cable broadcasting can not be	- a Please select “CABLE”not “NETWORK”from the “CHANNEL
selected.	SETTING”.

39