Analogue Audio output | * DVD : 48/96KHz sampling | |
(2CH. L/R) | * VCD : 44.1KHz sampling | |
| * CD : 44.1KHz sampling | |
Digital Audio output (COAXIAL) | * DVD : 48KHz sampling | |
| * VCD : 44.1KHz sampling | |
| * CD : 44.1KHz sampling | |
Vibration | * Data read Operation : | |
| 0.25G(0'P), at 10 to 500Hz sweep, sine wave, | |
| 1 Octave/min(except resonance point) | |
| * | |
| 2.0G rms, at 10 to 500Hz random | |
| (30min/Axis for X, Y, Z) | |
| After test, there shall be no hard errors. | |
Shock | * Data read Operation : | |
| 6G, 11msec half sine wave | |
| (20 shocks for X,Y,Z with 3 seconds between shocks) | |
| * | |
| 60G,11msec half sine wave | |
| After test, there shall be no hard errors | |
|
| |
Electrostatic | * The drive should withstand 8kV test voltage | |
Discharge | ||
of Electrostatic Discharge and meet | ||
Requirements | ||
the acceptance criteria as specified in IEC | ||
| ||
|
| |
Loader Reliability | * MTBF : 100,000 POH at 20% duty cycle | |
| in room temperature. | |
| * MTTR : max. 30 min | |
| * Tray : min. 30,000 cycle (with limit switch) | |
| * Feeding : min. 1 million full stroke seeks | |
| (without limit switch) | |
| * Noise : max. 40 dB (at 1 m) | |
Data Transfer | * DVD : 2.76 MB/sec(2X Speed in CLV mode) | |
Rate(Sustained) | * CD : max. 600 KB/sec(4X Speed in CLV mode) | |
|
| |
Access Time | * DVD : Less than 300 ms (Average), random | |
| Less than 360 ms (Average), full stroke | |
| * CD : Less than 340 ms (Average), random | |
| Less than 400 ms (Average), full stroke | |
|
| |
Data Buffer | 256KB (DVD/CD) | |
|
| |
Error Rate | * max. | |
|
| |
Disc Loading | * Type : motorized tray | |
| * Time : 1.5 sec(typical) | |
|
|
42