PYLE Audio PLDVCR500, PLDVCR600 user manual Specifications, Tape Width

Specifications

VCR PART

Power Supply	DC 12V
Consumed electricity	24W
Weight	approx 3.9 Kg
Dimension (WxHxD)	265mm x130mm x 275mm
Operative temperature	5°C~35°C (Humidity : 80% maximum)
Installation condition	Horizontal
Received channels	VHF: 2-13 CH / UHF: 14-69 CH / Cable: 1-125
Signal type	NTSC-M
Antenna Input/output	U/V-mixed: 75½unbalanced
VIDEO input	1.0 Vp-p 47k ohm unbalanced, RCA JACK
AUDIO input	Line Input -8.8dBm, 47k ohm minimum
VHF output	3 or 4 CH
VIDEO output	1.0 Vp-p 47k ohm unbalanced, RCA JACK
TAPE WIDTH	12.65mm (1/2INCH) VHS
Record System of Luminance Signal	Frequency Modulation Recording
Record System of Color Signal	Down converted sub carrier phase shift system
Tape Speed	SP : 33.35 mm/s EP : 11.12 mm/s (FOR NTSC)
REC Time (T-120)	SP : 2Hours EP : 6 Hours (FOR NTSC WITH T-120)
FF/REW Time	ABOUT 4 Min (T-120)
Luminance S/N	SP : 43 dB Min EP : 41 dB Min
Audio Signal Output	1.Mono
	EE/SN-1 : -5.8dBm±2dBm(1Khz) 1Kohm Maximum
	SN-2 : SN-1+2,-5dBm(7Khz) 1Kohm Maximum
	2. Hi-Fi
	EE/REC => PB;SP -5.8dBm±2dBm(400Hz) 1Kohm Maximum
	SN-7A; -5.8dBm±2dBm(1Khz) 1Kohm Maximum
Audio S/N (A.W)	MONO ; SP 42 dB Minimum SLP 40dB mINIMUM
	Hi-Fi ; SP/SLP 68dB Minimum

A.Frequency Range

Hi-Fi ; SP/SLP 0+1,-3dB [20Hz-20KHz]

40