RCA RTD396 user manual Playing jpeg files, Rotate an image, Connecting Auxiliary Components

Playing a Disc - Special Function

Play modes for CD (continued)

• Edit mode: Program operation works only when

"Edit mode" is selected.

• Program view: To view tracks/files in the

"Program view" list. It is disabled when the

"Program view" list is empty.

• Add to program: Add files/tracks to the "Program

view" list. It is disabled if the "Edit mode" item is

not selected.

Notes

• The time taken for the contents of the

disc to be displayed varies according to the size and number of jpeg files on the disc. If nothing is displayed after a few minutes, the file sizes may be too large. Reduce the files’ resolution and write another disc.

• Before inserting a disc, make sure it is

• Browser view: To view files/tracks in the original

view list.

• Clear program: Delete the files/tracks in the

Program view list. Select a file/track or more you

want to delete in full stop mode (press STOP

twice). " " will appear besides the deleted

compatible with the unit.

AV IN / AUX IN

EN

file/track. Select Clear program and then press

ENTER. It is disabled if the Edit mode is not

selected.

Note

The program will be deleted if disc tray is opened.

Playing jpeg files

Jpeg files are image files. Make sure that they have a resolution of less than 2 megapixels.

1.Press the OPEN/CLOSE button to open the disc tray.

2.Place a disc that contains JPEG files and close the disc tray.

A list of folders/files will appear on the screen. Press or button to select your desired file, and then press ENTER or PLAY button to start playback.

Press the STOP button to display a folder list.

Rotate an image

Press the ANGLE button repeatedly. The image will rotate in the clockwise direction as follows:

You can connect Audio or Audio-Video devices such as a TV, VCR or Set Top Box to this unit using the AUDIO IN jacks at the back of the unit or AUX IN jack on the front panel of the unit. This unit will take the audio from the connected device and play the audio through the speakers.

Connecting Auxiliary Components

Refer to “Getting sound from external sources such as a Cable Set Top Box or a TV” for details on connecting the auxiliary components to the unit.

Selecting AV IN / AUX IN mode

Press the SOUND button on the remote control to select AV IN/AUX IN mode.

Sound output in AV IN or AUX IN mode

•You may change the Surround Sound setting to select between 6 (5.1) Channel and 2 Channel (Stereo) mode (see instructions under AUDIO SETUP).

•If the AV IN or AUX IN audio signal is mono, you may not receive audio on all speakers.

19