Radio Shack PRO-90 owner manual

The scanner automatically designates each bank's first channel as its priority channel. Follow these steps to se- lect a different channel as the priority channel for a bank.

1.Press MANUAL.

2.Enter the channel number you want to select as the priority channel, then press MANUAL again.

3.Hold down PRI until the scanner beeps twice. P appears to the left of the channel number.

4.Repeat Steps 2–3 for the channel in each bank you want to program as a priority channel.

To turn on the priority feature, press PRI during scanning. PRI appears. Every 2 seconds the scanner checks the priority channel in each bank that is turned on, starting from the lowest to the highest-numbered priority chan- nel.

To turn off the priority feature, press PRI. PRI disap- pears.

Notes:

•The priority feature must be turned off to use the data skip feature (see “Skipping Data Signals” on Page 31).

•You can lock out priority channels. If you lock out all priority channels, P ch Loc Out appears when you turn on the priority feature.

29