Remote control operation, Loading batteries

Remote control operation

How to operate

Operation range

Remote control sensor on the Subwoofer

6 m

30°

	POWER	1
		1
2	MUSIC/CINEMA	4
	VOLUME	4
3	PHASE
3
	REMOTE CONTROL UNIT RC-W0502

Model : RC-W0502

Infrared ray system

Plug in the power supply plug of the Subwoofer to the AC outlet and press the POWER switch on the Subwoofer to turn ON.

When power is ON : Remote control operation is immediately available.

In Standby mode : First press the POWER key of the re- mote control unit to ON, then press the desired key.

SW-505D (EN)

1POWER key

Press to switch the power ON/STANDBY when the POWER switch of the Subwoofer set to ON.

2MUSIC/CINEMA select key	0
This key has the same function as the MODE key on the
Subwoofer.
When MUSIC indicator lights	music mode
When CINEMA indicator lights	movie mode
3 PHASE select key	0
This key has the same function as the PHASE select key on
the Subwoofer.
When NORMAL indicator lights	Normal phase
When REVERSE indicator lights	Reverse phase
4 VOLUME control keys	0

÷This keys have the same function as the VOLUME CON- TROL knob on the Subwoofer.

FRANÇAIS DEUTSCH NEDERLANDS

Loading batteries

1. Remove the back cover.

2. Insert batteries.

3. Close the back cover.

Open by pushing the position	Insert two R03 (”AAA”-size) batteries
marked with the arrow.	according to the polarity indication.

		1. The batteries initially supplied are intended for use in checking the remote control operations, so their service life may be shorter
	Notes	than usual. When the remote controllable distance shortens or remote control becomes impossible, replace both of the batteries
	Notes	with new ones.
		with new ones.

2.Malfunction may occur if direct sunlight or the light of a highfrequency lighting fluorescent lamp enters the remote control light sensor. In such a case, change the system installation position to prevent the malfunction.

ITALIANO ESPAÑOL