1. Automatic Operation
NOTE
OPERATION WITH THE REMOTE CONTROLLER
The air conditioner calculates the difference between the thermostat setting and room temperature, and automatically determines the mode to operate under cooling or heating. Then, the air conditioner continuously operates under the mode selected at initial operation.
STEP 2
STEP 1
Check that the circuit breaker on the power panel is turned on.
Once mode is selected and the unit is preset by following the steps below, you can have the air conditioner automatically bring the room to the desired temperature simply by pressing the ON/OFF operation button.
STEP 1 Press the MODE selector button to .
STEP 2 | Press the ON/OFF operation button. |
NOTE
To stop the air conditioner, press the ON/OFF operation button again.
•To change the temperature setting; press the temperature setting buttons and change the setting to the desired temperature.
12