Panasonic CU-3KE19NBU, CS-MKE9NKU, CS-MKE7NKU, CU-4KE31NBU appendix Adjusting The Airflow Direction

Models: CS-MKE12NKU CU-3KE19NBU CU-4KE24NBU CU-4KE31NBU CS-MKE7NKU CS-MKE9NKU

1 56
Download 56 pages 332 b
Page 22
Image 22
ADJUSTING THE AIRFLOW DIRECTION

ADJUSTING THE AIRFLOW DIRECTION

1. Horizontal

CAUTION

The horizontal airflow can be adjusted by moving the vertical vanes with your hands to the left or right.

When the humidity is high, the vertical vanes should be in the front position during the cooling or dehumidifying operation. If the vertical vanes are positioned all of the way to the right or left, condensation may begin to form around the air vent and drip down.

2.Vertical The vertical airflow can be adjusted by moving the flap with the remote controller. Do not move the flap with your hands. Confirm that the remote controller has been turned on. Use the FLAP button to set either the sweep function or one of the six airflow direction settings.

 

SWEEP

 

 

COOL

 

 

DRY

SWEEP

 

 

 

 

HEAT

A. Sweep function

B. Setting the airflow manually

 

The flap starts moving up and down to

 

Referring to the above illustration, use the

deliver air over the sweep range.

FLAP button to set the airflow direction

 

C. Auto flap function

within the range used during the heating,

cooling, or dehumidifying operation.

The flap is set to the recommended

 

 

position.

 

 

NOTE

CAUTION

The flap automatically closes when the unit is off.

During the heating operation, the fan speed will be very low and the flap will be in the horizontal position (position Manual background) until the air being blown out of the unit begins to warm. Once the air warms up, the flap position and fan speed change to the settings specified with the remote controller.

Use the FLAP button on the remote controller to adjust the position of the flap. If you move the flap by hand, the flap position according to the remote controller and the actual flap position may no longer match. If this should happen, shut off the unit, wait for the flap to close, and then turn on the unit again; the flap position will now be normal again.

Do not have the flap pointed down during cooling operation. Condensation may begin to form around the air vent and drip down.

21

Page 22
Image 22
Panasonic CU-3KE19NBU, CS-MKE9NKU, CS-MKE7NKU, CU-4KE31NBU, CU-4KE24NBU, CS-MKE12NKU appendix Adjusting The Airflow Direction