REMOTE CONTROLLER
Transmitter
Sensor
| Display |
| (Cover closed) | |
| QUIET button | ON/OFF operation button | ||
|
| 1 HR. TIMER button |
| |
|
| Temperature setting buttons (TEMP.) | ||
|
| MODE selector button |
| |
FAN SPEED selector button | NIGHT SETBACK button | |||
| FLAP button | HIGH POWER button |
| |
|
|
| ||
ON TIME | Advance button | Advance button | OFF TIME | |
setting |
| setting | ||
Return button | Return button | |||
buttons | buttons | |||
| ||||
| CANCEL button | CLOCK button |
| |
| SENSOR button | Time display selector button | ||
|
| ACL button |
| |
| ADDRESS switch | Temperature display selector button | ||
|
|
|
NOTE
The illustration above pictures the remote controller after the cover has been opened.
Transmitter | When you press the buttons on the remote controller, the | mark appears in the | |
| display to transmit the setting changes to the receiver in the air conditioner. | ||
|
| ||
Sensor | A temperature sensor inside the remote controller senses the room temperature. | ||
|
| ||
Display | Information on the operating conditions is displayed while the remote controller is | ||
| switched on. If the unit is turned off, FLAP setting and FAN SPEED setting are | ||
| not displayed. |
|
|
|
| ||
QUIET button | : When you press this button, the fan rotates slower than the fan speed | ||
| setting to provide a quieter operating sound. |
| |
|
|
| |
ON/OFF operation button | This button is for turning the air conditioner on and off. |
| |
|
| ||
1 HR. TIMER button | : When you press this button, regardless of whether the unit is operating or | ||
stopping, the unit operates for one hour and then shuts down. | |||
|
|
|
|
Temperature setting buttons | Press the | button to increase the set temperature. |
|
(TEMP.) | Press the | button to reduce the set temperature. |
|
| The temperature setting changes by 1 °C or 2 °F each time one of the TEMP. | ||
| buttons is pressed. |
| |
|
|
|
|
8