Peavey PR 15P manual Applications, Fuse, IEC Power Cord Connection, ON-OFF Switch

Applications

The Peavey PR™15P has a variety of applications such as sound reinforcement, public address, side fill system, karaoke or musical playback. With the optional monitor stand kit, the Peavey PR 15P makes an excellent stage monitor.

A typical signal source for the line-level inputs of the Peavey PR 15P would be a sound reinforcement mixing console (mixer) or the output from a CD player, Minidisc player or tape deck. A dynamic microphone can be connected and used as well.

R E A R P A N E L

(1) FUSE

The unit is AC power line fuse protected from overloads and fault conditions with an ABC-type fast-blow 5 Amp fuse. This fuse is located within the cap of the fuse holder. If the fuse fails, THE FUSE MUST BE REPLACED WITH THE SAME TYPE AND VALUE IN ORDER TO AVOID DAMAGE TO THE EQUIPMENT AND TO PREVENT VOIDING THE WARRANTY. If the unit repeatedly blows fuses, it should be taken to a qualified service center for repair.

(2) IEC POWER CORD CONNECTION

This receptacle is for the IEC line cord (supplied) that provides AC power to the unit.

Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does not have a ground pin, a suitable grounding adapter should be used and the third wire should be grounded properly. To prevent the risk of shock or fire hazard, always be sure that the mixer and all other associated equipment are properly grounded.

(3) ON-OFF SWITCH

This rocker switch supplies AC power to the PR 15P when switched to the ON position

5