zSystem
Select this menu item is to set TV system: SECAM => NTSC =>PAL, press NTER button on the remote or tap the screen to select.
zAudio
Select this menu item is to set the TV sound system:
When system setting PAL, press ENTER on remote or tap the screen button to select TV sound system: D/K=>M/N=> B/G=> I.
When system setting SECAM, TV sound system B/G=>I=>D/K.
When system setting NTSC, press 
button to automatic skip TV channel term.
Channel
Select this menu item is to set your desired searching channel, press 
/ 
button on remote
to select one, or press the 
/ 
icon to select channel.
zFine
Select this menu item is to fine TV tuning and sound until it achieves the best quality, press
/ 
button on remote or tap relevant option to adjust.
zMemory
Select memory on or off is to set whether memory the searched station or not, press ENTER on remote or tap the screen button to select.
◆AV-IN Mode
To start
Connect the external audio/video signal source to this unit. Select
Note: If there is no external video input, the TFT displays “NO SIGNAL”.
Press the 
icon to be back to main menu.
◆Setting Control
Press SET button on the RC or SET icon on the main menu to go to setup pages.
1)Rotate the VOL knob on the front panel or press up/down arrow on the RC to select any items and then press ENTER button on the RC to confirm the item. Press LEFT/RIGHT buttons on the RC to return to previous menu or enter the next menu.
2)Rotate the VOL knob on the front panel or press LEFT/RIGHT buttons on the RC to adjust the setting. Press the ENTER button on the RC to confirm.
3）Press SET button on the RC or front panel again return to current mode.
Sound
EQ: select the digital sound effect.
Bass: bass up/down.
Treble: treble up/down.
Balance: Left/right Balance control.
Fader: Front/rear Fader control.
13