Installation/Un-installation

Note

Before starting installation of the unit, make sure the wiring is connected properly. Use only the parts provided with the unit to ensure proper installation.

The use of unauthorized parts may cause malfunction.

Install the unit where it does not get in the driver’s way and will not injure the passenger in case there is a sudden stop, like an emergency stop.

INSTALLATION （Figure 1）

Insert Half Sleeve into dash-board hole and bend mount tabs outwards to fix it

If necessary, place the mount strap at the rear of the unit and fix it with provided washer as figure 2.

Push the unit into the Half Sleeve until you hear a click sound

Place Trim Ring over the unit and installation is completed as figure 3. (Some vehicle may not need Trim Ring)

UN-INSTALLATION

Insert the supplied extraction keys into the unit and pull the unit out with keeping the extraction keys. (as Figure. 4)