Orion Car Audio owner manual Specifications, Features, HCCA52 HCCA62

Page 9

Specifications

Model

HCCA52

HCCA62

 

 

 

Nominal Impedance

4 ohms

4 ohms

 

 

 

Power Continuous/Maximum

50/100

60/120

 

 

 

Frequency Response

75Hz - 20kHz

55Hz - 20kHz

 

 

 

Sensitivity

85 dB

86 dB

 

 

 

Mounting Depth

1..9" (49 mm)

2..125" (54mm)

 

 

 

Mounting Diameter

4..6" (116..5 mm)

5..625" (143mm)

 

 

 

Features

Cone

paper & Kevlar blend – moisture and UV resistant

 

 

Surround

polyester foam

 

 

Magnet

Neodymium

 

 

Voice Coil

CCAW wire – copper clad aluminum wire for best power handling

 

and light weight moving parts

 

 

Tweeter

dome–silk - Ferrofluid

 

 

Spider

single flat interlaced Conex

 

 

Tinsel leads

woven to spider

 

 

Custom crossover

with 12dB high pass, 6dB low pass, tweeter level adjustments, multi

 

stage tweeter protection, and mid/mid-bass zobel circuit..

 

 

Custom grills

 

 

Custom tweeter mounting kits including swivel

 

Custom Cast Aluminum Basket: Shallow mounting depth

 

NOTE: All Specifications are subject to change without notice..

 

­

8

© 2010 directed electronics—all rights reserved

Image 9
Contents Component Speaker Introduction Table of ContentsPractice Safe Sound InstallationWhat’s in the Box Tools of the TradeFinding Speaker Mounting Locations Installing the Mid/WoofersDoor Mounting Rear Deck MountingSurface Mounting Installing the TweeterFull Flush Mounting Installing the CrossoverParallel Wiring Bi-Amp Wiring Specifications FeaturesHCCA52 HCCA62 Français Installation DES HAUT-PARLEURS Médiaux ET DE GravesOÙ Monter LES HAUT-PARLEURS Montage SUR UNE PortièreInstallation DU HAUT-PARLEUR Daigus Montage EN SurfaceMontage Encastré Installation DU Répartiteur Caractéristiques SpécificationsUbicaciones DE Montaje DE LOS Altavoces EspañolMontaje EN LA Puerta Montaje EN LA Repisa TraseraInstalación del Tweeter Montaje EN SuperficieMontaje AL RAS Instalación DEL Crossover Características EspecificacionesSO Platzieren SIE DIE Lautsprecher DeutschTüreinbau Einbau IM KofferraumEinbau des Hochtöners OberflächeneinbauBündiger Einbau Installation DER CROSSOVER-EINHEIT Eigenschaften DatenItaliano Installazione DEI MIDRANGE/WOOFERMontaggio Sulle Portiere Montaggio NEL Piano Portaoggetti PosterioreInstallazione del tweeter Montaggio a SuperficieMontaggio a Filo Installazione DEL Crossover Caratteristiche Dati TecniciDeterminação DOS Locais Para Instalação DOS ALTOS-FALANTES PortuguêsInstalação NAS Portas Instalação no Painel TraseiroInstalação do tweeter Instalação NA SuperfícieInstalação Embutida Instalação do Crossover Especificações Warranty

HCCA62, HCCA52 specifications

Orion Car Audio has long been recognized for its commitment to high-quality sound and innovative technology. Their HCCA series, particularly the HCCA52 and HCCA62 models, epitomize this dedication by combining impressive power handling with advanced design features. The HCCA52 is a 5.25-inch speaker that offers an astonishing balance between size and sound performance. It is designed to deliver high output levels while maintaining clarity and precision across a wide frequency range. With a peak power handling of 400 watts and an RMS rating of 200 watts, this speaker is capable of filling any vehicle with exceptional audio quality without distortion.

One of the standout features of the HCCA52 is its lightweight, yet sturdy, polypropylene cone, which contributes to the speaker's efficiency and durability. The cone is paired with a high-quality rubber surround, which enhances the speaker's longevity while allowing for significant excursion. The treated cloth dust cap aids in reducing unwanted resonances, allowing for a clearer sound performance. Additionally, the oversized voice coil increases power handling and ensures reliability during high-volume playback.

On the other hand, the HCCA62 is a 6.5-inch model that caters to those seeking a more robust performance. With an impressive peak power handling of 600 watts and an RMS of 300 watts, the HCCA62 can accommodate larger vehicles and bigger sound requirements. The drive system utilizes a similar polypropylene cone and rubber surround configuration found in its smaller counterpart, ensuring durability and responsiveness.

Both models feature advanced technologies such as vented pole pieces that enhance cooling and increase efficiency, leading to longer playtime without risking damage from overheating. The HCCA series also benefits from a unique tweeter design, which allows for extended high-frequency response and excellent imaging. By utilizing neodymium magnets, the tweeters provide crisp treble that complements the rich bass produced by the main speakers.

Other characteristics include high sensitivity ratings, which ensure that these speakers can produce loud volumes with less power input, making them ideal for use with various head units and amplifiers. The HCCA series is also engineered for easy installation, featuring versatile mounting options that fit seamlessly into a wide range of vehicle models.

In summary, the Orion Car Audio HCCA52 and HCCA62 are engineered for audio enthusiasts seeking exceptional sound quality, durability, and performance. Their combination of innovative design, powerful handling capabilities, and advanced technologies make them a top choice for those looking to upgrade their car audio system.