Profile MP6600 installation instructions ISO/DIN Mounting

Page 10

ISO/DIN MOUNTING

If you own a Japanese vehicle, you can use the mounting screw holes on the side of the CD/MP3 player to attach to the factory mounting brackets.

!Detach the removable face of the MP6600 by depressing the release button

!Remove the outside trim ring by gently pulling at both outer edges (See page 10).

!Remove the side retaining plates by unscrewing the two phillips screws.

!Remove the brackets from the factory radio, paying close attention to their position.

!Attach the brackets to the MP6600 in the same position as the factory radio.

!After attaching the wiring harness to the factory wiring loom (See Electrical and Signal Connections) and plugging the antenna lead , place the CD/MP3 player in the dash aligning the mounting hole of the CD/MP3 player with the factory mounting brackets. Secure the radio to the brackets using factory mounting screws.

FACTORY SIDE RETAINING PLATES,

STYLE AND SHAPE WILL VARY

FOR EACH VEHICLE

Once the CD/MP3 player is secured, insert the face plate with the right side of the face plate angled in first then gently push the left side of face plate until it snaps completely in place.

9

Image 10
Contents MP6600 Page Keep Your Sales Receipt FeaturesIntroduction 2MP6600Safety Precautions Secure the CD/MP3 playerCare and Maintenance Cleaning the CD/MP3 playerElectrical and Signal Connections Four Speaker SystemTWO Speaker System 6MP6600Mounting the CD/MP3 Player DIN Sleeve Mounting8MP6600 ISO/DIN Mounting Removing the CD Player 10MP6600Operating the Slide Down Face Location and Function of Controls 12MP6600VOL 14MP6600 Automatic Storing and Program ScanningAMS 16MP6600 Direct Track AccessMP3 Functions Loading the MP3 DiscDirectory or Track Name Access Directory Access FirstSymptom Cause Solution Trouble Shooting the SystemError Codes 18MP6600Symptom Cause Solution Specifications 20MP6600Limited Warranty Shoemaker AVE Warranty Repair PolicySanta FE SPRINGS, CA Profile Consumer ELECTRONICS, INC Shoemaker AVE