DISPLAY / CLOCK ADJUSTMENT- Press this button , the LCD will display the clock for about 2 seconds, then return to the previous display mode. For clock adjustment, press
and hold the “DISP” button until the display flashes. Press the tuning up button 
to
adjust the hours. Press the tuning down button 
to adjust the minutes.
FUNCTION SELECT - Like the DSP button, the “SEL” button allows you to display different functions. Press the “SEL” repeatedly to move the display through Volume,
Treble, Balance andFader functions. Use
and 
buttonsto adjustthe selected mode. When the mode has not been adjusted for several seconds, display and mode returns to normal radio or CD operation.
VOL | BAS | TRE | BAL | FAD |
(Volume) | (Bass) | (Treble) | (Balance) | (Fader) |
VOLUME - Press the “SEL” button once. Adjust the volume level using the
and 
buttons.
BASS - Press the “SEL” button two times. Adjust the bass level using the 
and 
buttons.
TREBLE - Press the “SEL” button three times. Adjust the treble level using the
and 
buttons.
BALANCE - Press the “SEL” button four times. Adjust the sound balance
between left and right speakers using the 
and 
buttons.
FADER - Press the “SEL” button five times. Adjust the sound balance between
front and rear speakers using the 
and 
buttons.
VOLUME UP - Press 
button to increase the system’s volume.
VOLUME DOWN - Press 
button to decrease the system’s volume.
BAND/LOUDNESS- Press the “BD/LD” button momentarily to change between three FM bands and one AM band.
FM1 | FM2 | FM3 | AM |
To activate the loudness press and hold the “BD/LD” button for two seconds. To deactivate the loudness, press and hold the “BD/LD” button again for two seconds.
MODE - Press the “MODE” button to change between the radio tuner and CD/MP3 player.
LOCAL / DX - This button is used to control the sensitivity of the tuner while searching for a station. When the radio is powered on, the local mode is off by default. Press the “LOC” button to turn on the local mode only to receive the strongest stations.
SECURITY LED - The radio is equipped with a flashing security L.E.D. located under the radio’s face plate . Designed as a theft deterrent, the L.E.D. will flash when the unit is turned off with the face plate removed.
13