Profile installation instructions 14MP6600, Automatic Storing and Program Scanning

Page 15

TUNING CONTROLS - Use the up and down buttons to make the following adjustments

SELECT STATIONS - Press and immediately release a tune button

or

to move a radio frequency number down or up one step. Press and hold a

tune button

or

for several seconds to seek to the next clear

 

station.

 

 

 

SKIP TRACKS - Press a tune button or to move to the previous or the next track on the CD. The Track number will show on the display.

FAST FORWARD AND FAST REVERSE - Press and hold button or

to fast forward or fast reverse through a song on the CD. The CD play starts when you release the tune button.

PRESET STATIONS - There are six number buttons to store and recall stations for each band.

STORING A STATION - Select a band (if needed) as explained in . Select a radio station you wish to store. Select a preset numbered button, press and hold the preset button for a few seconds till you hear a beep indicating the station has been stored.

RECALL A STATION - Select a band (if needed) as explained in . Select a preset numbered button.

REPEAT - Press the “REPEAT” button to continuously play the current song. Press a second time to stop the repeat feature.

CD SCAN - Press the “CD SCAN” button to play several seconds of each track of the current disc. Press a second time to stop intro and listen to the track.

SHUFFLE - Press the “SHUFFLE” button to play all tracks of the current disc in random sequence. Press a second time to stop random play.

AUTOMATIC STORING AND PROGRAM SCANNING

AUTOMATIC STORING - Press and hold the “AMS/MU” button for several seconds to activate the automatic storing function. Once activated, the radio starts searching for the next frequency in the local mode and stores the clear radio stations into the preset memory. If after searching in the local mode the radio does not find six clear stations, then it will repeat the search in the distance mode. After completion, the radio will change back to the preset mode.

PRESET SCANNING - Press the “AMS/MU” button shortly to activate the preset scanning function. During the scanning, it will stop at every stored station for several seconds and the number of the channel being scanned flashes on the display. Press the “AMS” Button a second time to stop scanning.

14MP6600

Image 15
Contents MP6600 Page 2MP6600 FeaturesIntroduction Keep Your Sales ReceiptSecure the CD/MP3 player Safety PrecautionsCleaning the CD/MP3 player Care and MaintenanceFour Speaker System Electrical and Signal Connections6MP6600 TWO Speaker SystemDIN Sleeve Mounting Mounting the CD/MP3 Player8MP6600 ISO/DIN Mounting 10MP6600 Removing the CD PlayerOperating the Slide Down Face 12MP6600 Location and Function of ControlsVOL Automatic Storing and Program Scanning 14MP6600AMS Loading the MP3 Disc Direct Track AccessMP3 Functions 16MP6600Directory Access First Directory or Track Name Access18MP6600 Trouble Shooting the SystemError Codes Symptom Cause SolutionSymptom Cause Solution 20MP6600 SpecificationsLimited Warranty Warranty Repair Policy Shoemaker AVESanta FE SPRINGS, CA Profile Consumer ELECTRONICS, INC Shoemaker AVE