Niles Audio SI-2125 specifications AC Power Plug, Supplied AC cord into the IEC

AC Power Plug

STEP

Plug the female IEC socket of the	Just like a computer or printer, the SI-2125
supplied AC cord into the IEC	has an AC cord which unplugs either at the
receptacle on the rear of the amplifier.	amp or at the wall for your convenience.
Plug the 2 prong plug into	If you use a grounded power strip, surge
120V 60 Hz wall outlet.	suppressor or extension cord, verify that
	proper ground is maintained.
CAUTION! Typically the	The SI-2125 draws a maximum of
preamp/receiver’s switched outlet	approximately 700 watts from an AC wall
is not rated for a power amplifier.	outlet. Use the auto turn on circuit instead.

INSTALLATION

14