Installation Considerations, Placement

INSTALLATION CONSIDERATIONS

Placement

Place the SI-2125 on a flat level surface like a table or shelf. It should be placed upright so that its weight rests on the four attached feet. Placing the weight of the amplifier on the rear or front panel for even an instant will result in damage to the amplifier's connectors and controls.

The SI-2125, like any hi-fi component, will last much longer if it is given adequate ventilation for proper cooling. When installing the SI-2125 in a cabinet, be sure that the rear of the cabinet is open to fresh air to provide proper cooling (see Figure 1). If the cabinet’s design will not accommodate an open rear, install two small “boxer fans” to provide continuous air flow into and out of the cabinet (see Figure 2). Place the SI-2125 so that there is at least 7" of free air space above the chassis. If the amplifier is located on a carpeted surface, place a board under the amplifier's feet. Do not block the ventilation holes on the top and bottom of the SI-2125.

CAUTION! When using low impedance speaker loads (less than 8 ohms Normal Mode) refer to figure 2 for proper placement.

The SI-2125 is equipped with an internal transformer, which generates a powerful magnetic field which could induce hum in a turntable (particularly a turntable equipped with a moving coil cartridge). Do not place a turntable directly above or directly adjacent to the SI-2125.

Figure 1	Figure 2
	Boxer Fan (55 CFM)	Boxer Fan (55 CFM)
	directly centered 7"	directly centered 2"
	on top of the SI-2125.	behind the SI-2125.

Make sure that there is a minimum of 7" of free air space above the amplifier for proper ventilation.

If the cabinet rear is not open to fresh air or if you’re using

low impedance loads, install two “boxer fans” to provide

Allow a minimum of 2" of depth behind unitcontinuous air flow into and out of the cabinet. to accommodate cables and connectors.

SI-2125 specifications

The Niles Audio SI-2125 is a versatile and powerful amplifier designed to meet the demands of modern audio systems, whether for home theater setups or multi-room audio solutions. Offering robust performance and user-friendly features, it stands out in the crowded field of amplifiers.

At the heart of the SI-2125 is its high-power output capability, delivering 125 watts per channel at 8 ohms. This ensures that it can drive a wide range of speakers, providing clean and dynamic sound that enhances the listening experience. The amplifier operates efficiently, allowing it to run cool, reducing the risk of overheating during extended use.

One of the standout features of the SI-2125 is its versatile connectivity options. It comes equipped with multiple input options, including both balanced XLR and unbalanced RCA connections. This flexibility enables easy integration into various audio setups, whether it’s a dedicated home theater system or a more extensive multi-zone audio installation. The amplifier also includes a trigger input for automatic power on/off, which simplifies operation and enhances convenience.

The SI-2125 incorporates high-quality components that contribute to its impressive sound quality. It features a toroidal transformer, which is known for its efficiency and low electromagnetic interference, resulting in a cleaner sound. The amplifier also utilizes a distinctive Class AB design, which balances the advantages of both Class A and Class B amplification, providing ample power while maintaining excellent audio fidelity.

Another noteworthy characteristic of the SI-2125 is its robust build quality. The amplifier comes housed in a durable chassis, designed to minimize vibrations and protect the internal components. This not only enhances longevity but also helps maintain the integrity of the sound. The front panel features a sleek design with clearly labeled controls that provide easy access to essential functions, including volume control and input selection.

In addition to performance, the SI-2125 also supports a range of advanced features aimed at enhancing usability. This includes a unique feature set that accommodates various speaker configurations, allowing users to optimize their audio experience to suit their specific preferences and room acoustics.

Overall, the Niles Audio SI-2125 is an exceptional choice for anyone seeking a high-performance amplifier that combines power, versatility, and ease of use. Its impressive specifications and thoughtful design make it an ideal addition to any serious audio setup, ensuring that listeners can enjoy their favorite music and movies with remarkable clarity and fidelity.