HONDA ACCORD 2008-10 / CROSSTOUR 2010
1 Disconnect the negative battery ter- | A |
minal to prevent an accidental short |
|
circuit. |
|
2 Unclip and remove the trim panel from above the glove box at the right side of the factory radio. (Figure A)
3 Unclip and remove the trim panel at the left side of the factory radio. (Figure B)
B
4 Remove the (2) Phillips screws from the left and right side of the of the factory radio. (Figure C)
5 Unclip and remove the top of the cen- ter console including the cup holders. (Figure D)
6 Remove (2) Phillips screws at the bot- |
|
tom edge of the pocket assembly. |
|
(Figure E) | C |
7 Remove (2) Phillips screws facing up inside of the pocket below the factory radio. (Figure F)
8 Unclip and remove the pocket assem- bly. (Figure G)
Continue on page 2.
E
D
1