Metra Electronics 99-7875T installation instructions Continue to kit preparation

Page 4

99-7875/99-7875T DASH DISASSEMBLY

HONDA ACCORD 2008-10 / CROSSTOUR 2010

9Remove (2) Phillips screws facing up on the bottom of the factory radio. (Figure H)

10 Unclip the factory radio assembly. Unplug and remove the radio assem- bly. (Figure I)

11 Remove (6) Phillips screws securing the climate controls to the factory radio assembly and remove the con- trols from the assembly. (Retain the screws and climate controls for re- use during kit preparation.)

12 Remove (4) Phillips screws securing the a/c vents to the factory radio assembly and remove the a/c vent from the assembly. (Retain the screws and a/c vents for re-use dur- ing kit preparation.)

13 Unclip and remove the hazard switch/passenger air bag light assembly. (Retain the hazard switch/passenger air bag light assembly for re-use during kit prepa- ration.)

14 Remove (4) Phillips screws securing trim panel at the bottom edge of the factory radio assembly and remove the trim panel. (Retain the screws and trim panel for re-use during kit preparation.)

15 Remove (9) clips from the back of the

factory radio assembly. (Retain the clips for re-use during kit prepara- tion.)

Continue to kit preparation.

2

F

G

H

I

Image 4
Contents 99-7875/99-7875T Page Honda Accord 2008-10 / Crosstour Continue to kit preparation 99-7875/99-7875T KIT Preparation DIN Mount Radio Provision with Pocket ISO Mount Radio Provision with Pocket Double DIN/STACKED ISO Mount Units Provision Final Assembly 99-7875/7875T 99-7875/99-7875T 99-7875/7875T Instructions