Metra Electronics installation instructions 99-7875/99-7875T KIT Preparation

Page 5

99-7875/99-7875T KIT PREPARATION

HONDA ACCORD 2008-10 / CROSSTOUR 2010

1Snap the hazard switch/passenger air bag light assembly into the radio housing from front. (Figure A)

2Secure the a/c vents into the radio housing using the factory hardware from rear. (Figure B)

3Secure the climate controls into the radio housing using the factory hard- ware from rear. (Figure C)

4Secure the trim panel onto the radio housing using the factory hardware. (Figure D)

5Attach the clips to the back of the radio housing. (Figure E)

Continue to kit assembly.

A

PAS

SENGER

AIRBAG

B

E

C

D

3

Image 5
Contents 99-7875/99-7875T Page Honda Accord 2008-10 / Crosstour Continue to kit preparation 99-7875/99-7875T KIT Preparation DIN Mount Radio Provision with Pocket ISO Mount Radio Provision with Pocket Double DIN/STACKED ISO Mount Units Provision Final Assembly 99-7875/7875T 99-7875/99-7875T 99-7875/7875T Instructions