Metra Electronics 95-3305 Double DIN Radio Provision, Stacked ISO Units Provision

95-3305 KIT ASSEMBLY

DOUBLE DIN RADIO PROVISION

*Note: Refer also to the instructions included with the aftermarket radio.

NOTE: XL-7 ONLY

Trim top corners of radio housing.B (Figure A)

A

1 Slide the appropriate bracket into the C

trim plate aligning the holes in the trim plate to the clips on the bracket.

(Figure B)

2Slide the DDIN radio unit into the trim plate bracket assembly and secure the unit to the kit using the screws sup- plied with the head unit. (Figure C)

STACKED ISO UNITS PROVISION

NOTE: XL-7 ONLY

Trim top corners of radio housing.

(Figure A)

A

1Slide the appropriate bracket into the trim plate aligning the holes in the trim plate to the clips on the bracket.

2Slide the stacked ISO DIN units into the trim plate bracket assembly and secure the units to the kit using the screws supplied with the head units.

(Figure C)

Continue to final assembly. 9

B

C