SUZUKI XL-7 2007-09
*Note: Refer also to the instructions included with the aftermarket radio.
1Disconnect the negative battery termi- nal to prevent an accidental short cir- cuit.
2Press in on sides of the shifter boot to release it from the shifter trim panel.
(Figure A)
3Lift the boot up to access the Allen screw securing the shifter knob to the shifter lever. Loosen the Allen screw and remove the shifter knob.
4Remove (1) torx screw from the shifter trim panel (Figure C), then using a panel removal tool unsnap the shifter trim panel. Unplug and remove the panel. (Figure D)
5Using a panel removal tool unsnap the radio trim panel. Unplug and remove the panel. (Figure E)
6Remove (4) 9/32” screws securing the radio. Unplug and remove the radio.
Continue to kit assembly.
A
B
C
ED
| AIR | BAG |
PASSENGER |
|
|
12:02 103:5
4