Connecting a Powered Vocal Monitor

Getting Connected cont.

The HV-1200 has two types of connections for mic-only output. This is for compatibility with different types of powered vocal monitors. See your powered vocal monitor instruction manual to see if you need an XLR or ¼” cable.

What you will need:

•Powered Vocal Monitor

•XLR or ¼” cable

To connect a Powered Vocal Monitor to the HV-1200

1.Connect one end of the XLR or ¼” cable to the rear panel of the HV-1200.

2.Connect the other end of the XLR or ¼” cable to the input on the Powered Vocal Monitor.

��

	��		��	��	��	�	�
					��
�	��	�	��

��

				��
	��
	��	�	�
�	�	�	�
��	�	��	� ��	��
��		��	��	��
��			��	��
��			�
��			��
��				��
��				��
��				��
				��

��

Connecting to TVs/Video Monitors using the RCA Video (yellow) Outputs

There are three video outputs on the rear panel of the HV- 1200. All three connectors output the same video signal which is selected by the AV selector button on the front panel.

What you will need:

•Up to 3 TVs/Video Monitors with RCA video inputs

•RCA video cable(s) (yellow)

To connect TVs/Video monitors to the HV-1200

1.Connect one end of an RCA video cable to an RCA video OUT jack on the HV-1200 rear panel.

2.Connect the other end of the RCA video cable to the RCA video input on the TV/Video monitor.

3.Make sure the TV/Video monitor is set to the correct video input. Consult the TV/Video monitor’s user manual for the necessary instructions.

4.Repeat steps 1-3 for each additional TV/Monitor.

��

��								��	��	��
						��		��	��	��
										��
�					�	��	�	��
�
						��		��
��	��	��	��	��
				��
								��
��								��	�	�
��						�	�
						�	�
��
��
��
					��			�	��	� ��	�
��					��				��	��	�
��					��					��
					��					��
				��	��					�
					��					��

��