Telex SMP, FM-1, QSB-1 Downloading / Uploading, Downloading an Event, Uploading a SnapShot

Downloading / Uploading

After an event is set-up it may be downloaded to a DataFlash→ card for the eventual downloading into a FM-1 and thus to a system of up to 10 base stations.

A snap shot of a system of up to 10 base stations may also be uploaded to the SMP in order to examine the settings of the system for trouble-shooting, use the system as a ‘base line” for setting up other events, or just for records.

Downloading an Event

1.Open FM-1 System Manger Program

2.Create an Event

3.Save Event

4.Download Event to QSB-1 and DataFlash→ memory card.

5.Place memory card in an FM-1 and download card to FM-1.

Uploading a SnapShot

1.Download a Snap shot(s) to the DataFlash→ memory card from the FM-1

2.Remove the DataFlash→ card from the FM-1 and place in the QSB-1.

3.Open FM-1 System Manger Program

4.Upload the snapshot to the SMP from the memory card that is in the QSB-1.

NOTE: Snap Shots are named sequentially by the FM-1. The 1st snap shot will be, "snap shot 0" the second, "snap shot 1", etc. Up to 10 snap shots may be taken.

2-6